High temperature and high humidity chambers are widely used in enterprises and institutions such as aviation and aerospace, automobiles and motorcycles, military equipment and weapons, electrical and electronics, chemical metallurgy, quality inspection and measurement, postal and telecommunications, ships and railways, as well as universities, colleges and research institutions.
1、 Specification and Model
|
Device Name |
High temperature and high humidity chamber, constant temperature and humidity test chamber, constant humidity and heat test chamber |
||||||
|
Indicate |
1. The following device data must be at an ambient temperature (QT) of 25 ℃ Measured under no-load conditions in the studio; |
||||||
|
Model number |
HS-100 |
HS-225 |
HS-500 |
HS-800 |
HS-010 |
||
|
studio size |
450×450 ×500 |
500×600 ×750 |
700×800 ×900 |
800×1000 ×1000 |
1000×1000 ×1000 |
||
|
Overall dimensions |
1000×900 ×1620 |
1050×1150×1870 |
1300×1350×2050 |
1300×1550×2200 |
1500×1580 ×2280 |
||
|
Power (kW) A/B/C/D/E |
2.5 |
3.0 |
3.5 |
5.0 |
5.5 |
||
|
sex can point mark |
temperature range |
Room temperature ℃~100 ℃ |
|||||
|
Fluctuations/Uniformity |
±0.5℃/±2℃ |
||||||
| Humidity range/humidity deviation |
45%~98%R. H;+2、-3%R. H |
||||||
| Heating rate/cooling rate |
1~3℃/min; 0.7~1℃/min |
||||||
|
Temperature operation control system |
control apparatus |
Adopting a digital integrated microcomputer temperature controller with temperature and humidity display, it has the function of automatic calculation and can immediately correct the temperature and humidity change conditions |
|||||
|
output method |
Pulse type solid-state relay (PID+SSR) output; |
||||||
|
sensor |
Platinum resistance PT100 Ω/MV |
||||||
|
heating system |
High temperature resistant magnetic frame nickel chromium electric heating heater |
||||||
|
Humidification system |
External isolated, all stainless steel shallow surface evaporative humidifier |
||||||
|
protection system |
Leakage, short circuit, overheating, motor overheating, compressor overpressure, overload, overcurrent protection |
||||||
|
timer function |
Adjustable from 0.1 to 999.9 (S, M, H) |
||||||
|
Equipment and material configuration |
Exterior Material |
Carbon steel plate, phosphating electrostatic spraying treatment |
|||||
|
Inner liner material |
SUS304 stainless steel brushed wire board |
||||||
|
Door frame sealing |
Double layer high and low temperature aging resistant silicone rubber door sealing strip |
||||||
|
Standard Configuration |
2 stainless steel sample racks, 1 bag of standard wet ball gauze, 1 set of test lead holes (Ø 50, Ø 80, Ø 100mm) |
||||||
|
|
|
|
|
|
|
|
|
2、 Reference standards
GB10586-2006 Technical Conditions for Damp Heat Test Chamber
GB11158-2006 Technical Conditions for High Temperature Test Chamber
GB/T2423.2-2001 Test B: High temperature test method
GB/T2423.3-1993 Test Ca: Constant Damp Heat Test
GJB150-86 Equipment Environmental Test Method
3、 Equipment usage conditions
-
Environmental temperature: 5 ℃~+28 ℃ (average temperature within 24 hours ≤ 28 ℃)
-
Environmental humidity: ≤ 85%
-
Power requirement: 380V (± 10%) V/50HZ three-phase five wire system
4、 Random data
-
Certificate of conformity, warranty card, circuit diagram;
-
Instruction manual: operating methods, precautions, basic shipping accessories, maintenance and repair matters;
5、 Delivery Instructions
-
The supplier delivers the goods to the doorstep and is responsible for the shipping cost;
-
The supplier is responsible for introducing installation and debugging operations until the employee of the demander stands up to operate;
-
The warranty period is one year, starting from the date of installation and acceptance. The supplier promises to provide spare parts for life. If after-sales service must be provided on-site, the supplier shall arrive at the user's site within 48 hours.
