VIP member
High and low temperature alternating test chamber/high and low temperature test chamber/high and low temperature chamber/low temperature test chamber
Purpose: This device is mainly used to test the performance of products during storage, transportation, and use in high-temperature climate environmen
Product details
Purpose:
This equipment is mainly used to test the performance of products during storage, transportation, and use in high-temperature climate environments. It is mainly used for testing rubber, plastic products, and electrical appliances
Edge materials, plasticizing products, electrical and electronic products, automotive electronic products, electronic components, electronic spare parts, computers, displays, terminals, power switches, main
Board, monitor, charger, batteryLCDThermal oxygen aging test or ventilation aging test conducted on scanners, capacitors, and other materials. After testing, pass
To determine whether the performance of a product can meet the requirements through appraisal, in order to provide design, improvement, appraisal, and factory inspection for the product.
Main parameters:
|
typename
|
WLH
|
|
|
Studio Size
(mm)
|
3 m³-150 m³
|
|
|
Can be designed according to user requirements
|
||
|
temperature range
|
RT~+85℃
|
|
|
temperature uniformity
|
±2℃
|
|
|
temperature fluctuation
|
±0.5℃
|
|
|
heating up time
|
RT+10~+85℃≤25min
|
|
|
cooling rate
|
0.7～1℃/min
|
|
|
Temperature regulation method
|
Forced hot air circulation and ventilation method
|
|
|
Environmental temperature for use
|
0~+40℃
|
|
|
Thermal insulation enclosure structure
|
Outer wall material: color steel plate, surface spray treatment
|
|
|
Inner wall material: color steel plate or stainless steel plateSUS201
|
||
|
Box insulation material: fireproof rock wool as core material, or rigid polyurethane foam+glass fibre
|
||
|
transfer
joint
implement
|
heater
|
Nickel chromium alloy electric wire heater
|
|
fan
|
centrifugal fan
|
|
|
control
make
implement
|
monitor
|
LEDscreen
|
|
Operation mode
|
Fixed value method/Programming method
|
|
|
Setting method
|
English interface, key input method
|
|
|
display resolution
|
Temperature:0.1℃Time: 1 minute
|
|
|
input
|
KType thermocouple
|
|
|
communication
|
(Selection function)RS-485Interface with local and remote communication capabilities(Centralized monitoring software is requiredRS-485/RS-232Converter, requires occupationPCmachineCOMMouth andUSBEach mouth1individual)Can be connected simultaneously at most16Equipment, maximum cumulative cable length800m
|
|
|
control mode
|
PIDAction and automatic calculation
|
|
|
Auxiliary functions
|
Fault alarm, upper and lower limit protection function
|
|
|
Observation window
|
Vacuum coated tempered electric heating glass can prevent fogging
|
|
|
Lead hole
|
Can be set as required, ￠ 50mm, ￠ 80mm, ￠ 100mm
|
|
|
Standard configuration
|
Explosion proof lighting, air pressure balance window, sample holder (customizable according to requirements), sample power control terminal
|
|
|
Safety device
|
Leakage circuit breaker, fan overheating protection, over temperature protection, temperature fuse, etc
|
|
|
power supply(V)
|
AC380(1±10%)V (50±0.5)HzThree-phase four-wire+Protect the ground wire
|
|
|
Compliant with standards
|
GB/T2423.2-2008testBHigh temperature test methodGJB150.3-1986High temperature testGB/T7444、IEC216
|
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-