Network optimization information: Before charging, you will confirm whether the battery is damaged, the connection is normal, and the gas cap is open. Please do not open or power on the injection plug of the battery,Electric forkliftstorage batteryPlease do not drain the liquid before or during charging. Not smoking near the battery can generate sparks and fire. When charging, the battery cannot be discharged simultaneously, metal fixtures cannot be placed in the battery during charging, the battery is not repaired during charging, and the temperature of the electrolyte is lower than55 pounds? In the case of a new battery, the electrolyte with a specific gravity of 1.26 is cooled to 30 tanks and injected into the battery. The injection amount is reduced by 10-20 millimeters compared to the protective plate, and the static time is 6 hours. When the liquid temperature drops below 35 ° C, charging begins. The specific gravity of the electrolyte mentioned here is 30 ° C, and different temperatures must be converted using the following formula: D30=Dt 0.0007 (t-30).Forklift battery priceThe temperature of the electrolyte during the charging process should not exceed55 pounds. In other cases, reduce the charging current, manually cool down, or temporarily stop charging. When the loaded battery is saturated and charged, there is no substantial increase in voltage and electrolyte density within 2-3 hours, and a large number of bubbles are generated. The electrolyte density reaches 1.26, and the single cell voltage drops to 2.4V.1.7V per unit. When the electrolyte density drops to 1.18 at a voltmeter voltage of 41V (driving load), it must be carried out in a timely manner.