VIP member
HY-8 Large Shaker Bed
The HY-8 large shaking table rotary oscillator is a biochemical instrument used for cultivating and preparing biological samples. It is an indispensab
Product details
1、 Overview of HY-8 Large Shaker Bed
Cyclotron oscillator is a biochemical instrument for cultivating and preparing biological samples. It is an indispensable experimental equipment for scientific research, education, and production departments such as plants, organisms, microorganisms, biological products, genetics, viruses, medicine, and environmental protection.
2、 Characteristics of HY-8 Large Shaker Bed
The instrument is floor standing, with a low center of gravity, and operates smoothly and reliably in continuous operation. Its main feature is that the universal spring bottle holder is particularly suitable for the cultivation and preparation of biological samples for various comparative experiments. Equipped with mechanical timing. Stepless speed regulation, easy to operate * *.
3、 Technical specifications of HY-8 large shaking table:
3、 Technical specifications of HY-8 large shaking table:
model:HY-8
Name: Large shaking table
Shake board size:100*80cm
Bottled quantity:500ml*45*2
Amplitude:26mm
Oscillation mode: Cyclotron
Oscillation frequency:40-220r/min
electricitySource: Communication220V、50Hz
Three-phase AC motor Frequency Control
Non eccentric rotating mechanism
The transmission adopts high-quality bearings from Harbin Stainless steel special fixture
4、 Instructions for using HY-8 large shaker:
4、 Instructions for using HY-8 large shaker:
⒈Using at medium speed within the speed range can extend the lifespan of the instrument.
⒉The instrument should be placed on a sturdy workbench, with a clean and tidy environment, moderate temperature, and good ventilation.
⒊Before using the instrument, place the speed control knob in the * small position.
⒋Fill the culture test bottle. In order to ensure good balance performance of the instrument during operation and avoid significant vibration, all test bottle positions should be filled when bottling, and the culture medium in each bottle should be roughly equal. If there are insufficient culture bottles, the test bottles can be symmetrically placed or filled with other equal amounts of solution to fill the empty spaces.
⒌Select timer, set the timer to 'timer'”Location.
⒍Connect the external power supply and place the power switch in“open”The position and indicator light are on. According to the frequency converterRUNThe key,RUNSlowly adjust the speed knob when the light is on,100r/minAdjust the frequency to:12.00about.
⒎Before each shutdown, the speed control knob must be placed in the * small position, the power switch must be turned off, and the power supply must be cut off.
⒉The instrument should be placed on a sturdy workbench, with a clean and tidy environment, moderate temperature, and good ventilation.
⒊Before using the instrument, place the speed control knob in the * small position.
⒋Fill the culture test bottle. In order to ensure good balance performance of the instrument during operation and avoid significant vibration, all test bottle positions should be filled when bottling, and the culture medium in each bottle should be roughly equal. If there are insufficient culture bottles, the test bottles can be symmetrically placed or filled with other equal amounts of solution to fill the empty spaces.
⒌Select timer, set the timer to 'timer'”Location.
⒍Connect the external power supply and place the power switch in“open”The position and indicator light are on. According to the frequency converterRUNThe key,RUNSlowly adjust the speed knob when the light is on,100r/minAdjust the frequency to:12.00about.
⒎Before each shutdown, the speed control knob must be placed in the * small position, the power switch must be turned off, and the power supply must be cut off.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-