Operation and application scope of electrostatic precipitator box:

HM-092-1 electrostatic precipitator box is a box type electrostatic precipitator, and the shell material is stainless steel. During operation, employees manually feed objects that require electrostatic removal, such as circuit boards, phone cases, electronic components, etc., into the electrostatic precipitator box. Under the induction of an infrared sensor, the electrostatic precipitator box begins to automatically remove static electricity and dust. A large number of positive and negative ions generated by the ion generation device are quickly blown onto the surface of the object by high-pressure airflow, neutralizing the accumulated electrostatic charges on the surface of the object. At the same time, the high-speed airflow blows away the dust adsorbed by static electricity, and the dust falls into the lower dust collection area. Then, the dust is drawn to the bottom filter cotton by the exhaust fan at the bottom of the box for adsorption. The filter cotton can be repeatedly cleaned; After the object leaves the box, the electrostatic precipitator box automatically stops working, and the electrostatic precipitator time can be set to be adjustable within 0-30 seconds; Easy to install and operate!

Product Features

1. The dust and static removal time can be adjusted from 0 to 30 seconds;
2. The wind speed can be adjusted by adjusting the valve;
3. Flexible installation, transparent window for easy observation;
4. The movable drawer at the bottom of the front can be used to regularly clean the dust collection area;
5. Material: stainless steel, organic glass, etc;
6. Design dimensions can be applied to different products.

Technical specifications

Model (Model)	HM-092-1
Input voltage	220VAC
Power Consumption	50VA
Operating temperature	0℃~50℃
Operating air pressure	0.3~0.8Mpa
Dimensions (Size)	280 mm(L)x350 mm(W)x350mm(H)
Weight (weight)	KG
Air Consumption	Approximately 5m3/H (0.5MPA) of air consumption per nozzle
Ion balance	≤±30V

Decay Test Results

Testing Conditions	Test Voltage:+1000V~100V, -1000V~100V
	Environmental temperature (Temperature) 5 ℃~25 ℃ Relative humidity (RH) ≤ 60%
	Test distance: 100mm
Decay Time	正1.0s	Negative 1.1s
Offset Voltage	≤±15V	≤±15V

Instructions for use:

1. Insert the power plug into a grounded power outlet and connect the compressed air pipe (the compressed air should be filtered for water and oil)
2. After turning on the power switch, the electrostatic precipitator box is in working condition. When an object enters the box and the photoelectric switch senses an object below, the five electrostatic precipitator ion nozzles inside blow out a large amount of ion air. When the object leaves the box, the blowing automatically stops. A time relay can also be used to adjust the exhaust time.
3. The method of adjusting air pressure is to connect the trachea, turn on the air pressure, gently pull up the air pressure adjustment switch, and then rotate the switch left and right to adjust the air pressure. The air pressure can be seen on the pressure gauge, and it is more appropriate to adjust the air pressure to 4-7kg/cm2. After adjusting, press down the switch. The maximum air pressure should not exceed 7kg/cm2
4. The lower layer of the dust removal box is equipped with air filters, time relays, and battery valves; The middle drawer is used to hold filter cotton, which is used to absorb dust. When in use, you can spray some water on top of the filter cotton to achieve a more ideal vacuuming effect. The filter cotton can be washed with water, dried, and reused. Above the filter cotton is an exhaust fan.

Safety and maintenance:

1. Compressed air must pass through a filter to filter water and oil, and the socket connected to the dust removal box must be reliably grounded. The maximum air pressure should not exceed 7kg/cm2