VIP member
Guangyan 495 Fast Drying Adhesive 495 Instant Adhesive Metal Plastic Nylon Brake Tube Rubber Adhesive
Product Introduction: Guangyan 495 instant dry adhesive plastic and rubber bonding type, with low to medium viscosity, has good adhesion to various pl
Product details
Product Introduction
Guangyan 495 instant dry adhesive
Plastic and rubber adhesive type, with low to medium viscosity, has good adhesion to various plastics and rubbers, especially suitable for rapid bonding of hard nylon pipes.
Curing time at room temperature (s)
- Steel 5-20
- Rubber<5
- PVC 3～10
Performance after curing:
Full solidification time at room temperature (hr) 24
Shear strength (steel steel, MPa) 12-18
Working temperature (℃) -50~80
instructions:
- The bonding surface should be cleaned, dry and free of grease, and the surface should be smooth.
- Apply this product to one surface (avoid double-sided tape), align the other adhesive surface with the correct position, close and press tightly, release after 30-60 seconds, and reach the strength after 10 minutes.
- The amount of glue applied should be sufficient, and excessive application should be avoided.
- The workplace should maintain ventilation.
Notes:
- Once it splashes onto the skin, soak it in warm water first, wait for the adhesive film to soften, and then gently peel it off.
- If it splashes into the eyes, immediately rinse with clean water and take to the hospital.
- Keep away from children.
Storage conditions:Store in a cool and dry place. Store at a temperature of 5 ℃ for a shelf life of 12 months.
Packaging specification: 20g per piece
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-