Product Introduction

The grass planting grid is made of modified high molecular weight HDPE and polypropylene PP as raw materials, which are environmentally friendly and fully recyclable; It perfectly realizes the integration of lawn and parking lot, and planting grass grid is pressure resistant, wear-resistant, impact resistant, aging resistant, corrosion resistant, improving quality and saving investment; Unique flat plug-in overlap, labor-saving, fast, adjustable expansion joint.

Widely used in parking lots, fire exits, fire climbing surfaces, golf lanes, exhibition centers, modern factories, upscale living communities, rooftop gardens, etc.

Technical Specifications:

Construction technology of grass planting grid

The foundation soil should be compacted in layers, with a density of at least 85%;

After laying 350, the gravel bearing layer (600 thick for the fire lane) is flattened and compacted;

Set up a leveling layer consisting of 70 thick crushed stones and coarse sand;

Laying grass grids can be cut to a suitable shape with a saw, leaving a few millimeters of gap width between grids;

Planting soil on top of the ground, 1cm away from the mouth.

Laying grass or sowing grass seeds on the soil layer of the grass planting grid. When laying grass, the grass should be compacted on the planting soil, watered and maintained until the grass is alive, and then parked.

Comparison between Grass Planting Grid and Grass Planting Brick