1. How to translatepulltesting machineBasic Configuration

1. Maximum load: 50kN

2. Accuracy level: 0.5%

3. Effective testing space: effective travel of 800mm

4. Effective test width: 370mm (can be expanded according to the test sample)

5. Speed range: 0.001-500mm/min

6. Fixtures: Customize a four point bending fixture based on the sample (span, indenter curvature, reference standard)

7. Mechanical configuration: Panasonic servo motor, ball screw

8. Color touch screen electronic display+computer software, bidirectional operation

9. Safety protection door

IItensile testing machineSoftware Introduction

1. Load displacement curve; Load and time curves; Displacement and time curves; Stress and strain curves.

2. According to the requirements of each country for the test piece, edit the corresponding testing standards, fill in the sample information, edit the testing method, and provide options for future testing.

3. Automatically store the results of this experiment and edit them into a report for printing and output. There is a formula editing function that allows for comparison of multiple tested curves.

4. The decimal place, physical units, and password protection can be set.

5. Automatic reset: When the computer receives the instruction to start the experiment, the measurement system automatically resets to zero;

6. Automatic regression: Automatically identify the maximum force of the experiment, and the movable crossbeam automatically returns to its initial position at high speed;

7. Automatic archiving: Test data and conditions are automatically saved to prevent data loss caused by forgetting to save due to sudden power outages;

8. Testing process: The testing process, measurement, display, analysis, etc. are all completed by a microcomputer;

9. Display mode: Data and curves are dynamically displayed during the experimental process;

10. Structural reproduction: The experimental results can be accessed freely and the data curve can be reanalyzed;

16. Limit protection: It has two levels of protection: programmable control and mechanical protection;

17. Overload protection: Automatic shutdown when the load exceeds 10% of the rated value;

Emergency stop: equipped with an emergency stop switch, used to cut off the power supply of the entire machine in emergency situations;

Automatic diagnosis: The system has an automatic diagnosis function, which checks the measurement system and drive system for overvoltage, overcurrent, overtemperature, etc. at regular intervals. If any abnormal situation occurs, the machine will stop immediately;

18. The test host and computer software operate independently;

19. Language: Chinese and English are optional.

IIIpulltesting machineafter-sales service

1. Provide free on-site training services.

2. Regularly provide users with information about equipment and assist them in using, maintaining, and servicing the equipment.

3. If the device has software services, free upgrade services will be provided to customers.

4. Multimedia services: QQ remote service, WeChat video service.