Mold characteristics:

1. The function of high-frequency molds is to fuse (melt) the outer shape of the sunshade and mirror cover. Mirror frame, flat surface, door panel embossed.
2. The property of high-frequency mold preparation: it cannot crack after melting. After melting, the burrs should not be too long. The phenomenon of no extrusion occurs in the melted part.
3. Key design points for high-frequency molds: setting the height of the closed mold.
The gap between the upper and lower mold bodies is set.
Setting the slope of the upper mold blade.
4. Evolution of high-frequency molds: Copper mold fused steel mold two-stage (spring type)

Required equipment:

High frequency molds are applied to high-frequency plastic welding machines; The picture shows the installation of the mold

Product requirements, high-frequency molds can be divided into upper and lower molds

Click on the link to learn more:https://detail.1688.com/offer/.html?spm=a2615.7691456.0.0.917aca87W8ahf

The design process of high-frequency molds:

1. Drawing confirmation: Production equipment provides 2D or 3D finished product drawings - drawing size confirmation - drawing mold assembly drawings - setting the closed mold height to draw mold individual part drawings - drawing (CAM program conversion)

2. Purchase the required material specifications according to the mold drawing. Produce the required size and shape according to the drawing.
3. The two sides of the size and shape produced by processing are parallel. The height of the copper sheet is equal, and the parallelism tolerance should be within+-0.05mm.
4. Make door panel fasteners (fasteners are based on the dimensions given on the drawing).
5. Attach the finished product onto the aluminum plate, and then fix all copper sheets onto the aluminum plate with fasteners according to the shape of the drawing.
6. Fix fixture A onto the aluminum plate as a positioning tool for the size of the door panel.
7. Make a support device with foam attached on top, with a height about 3-5 mm lower than the copper mold surface.
8. Make handles on each end and fix them on the aluminum plate for easy handling.
9. Confirm again whether the dimensions of each part of the mold are correct.
10 trial molds (current, pressure, and screen current may vary depending on the size of the mold).

Product shooting:

Company Introduction:

Shenzhen Huaxiang Automation Machinery Equipment Co., Ltd. was established in Shenzhen, the earliest developed area of China's vacuum forming industry. It is an integrated enterprise that integrates research and development with production. The company covers an area of 2000 square meters and is a Taiwanese industrial technology company that can provide solutions for a series of packaging machinery and entire production lines, including mold customization, material supply, and finished product outsourcing. Customers are spread throughout the country and exported to India, Vietnam, Myanmar, Thailand, Taiwan, and other regions.

contact information:

Address: Building D, No.12 Low Mountain North Road, Xinsheng Village, Longgang District, Shenzhen
Website: www.szhx-tw.com
Email: hx@szhx-tw.com
QQ： 800026708
Telephone:
Mobile phone: (Rao Sheng)
Mobile phone: (Ms. Rong)