product details

Product Introduction

GF-LCS6008-WIFI-10AFor driving intelligent lighting controllers andGF-LCS6008-WIFI-16AThe load type intelligent lighting controller is a new generation wireless remote intelligent lighting controller independently developed and produced by Jiafuxin Technology. This product is based onWIFIAccess technology and cloud platform technology, inWIFIIn areas covered by network signals, users can remotely control and monitor the controller at any time using mobile client software or computer client software. It comes with three time schemes: date and time scheme, weekly scheme, and latitude and longitude scheme. Users can choose any time scheme for timed control, and it also supports external illumination sensors to intervene and automatically control through illumination parameters. The cloud platform supports customization and editing of power-saving mode, weekday mode, and holiday mode, and users can freely combine one or more for effect control. At the same time, the controller comes with its ownWEBPAGEEmbedded configuration webpage, supporting the establishment of any brand of smartphone and intelligent lighting controllerWIFIDirectly connect and pop up a device configuration webpage, making it convenient for customers to perform network configuration, product switch testing, and set desired automatic time schemes. The product comes with its own128X64LCDThe LCD display and touch sensitive operation buttons allow users to directly operate and test the equipment on site, greatly facilitating on-site operation and debugging. At present,GF-LCS6008-WIFI

Standard intelligent lighting controllers have been widely used in various intelligent lighting systems such as storefront signs, urban advertising, remote storefront management, landscape architecture, building lighting, urban squares, technology parks, ports and docks.

Support smartphone WiFi direct connection to complete communication and function configuration of the controller.

The embedded smartphone configuration interface is as follows:

Two system expansion diagram:

1 major function

Digital switch output8Output characteristics:Road output, one set normally open, one set normally closed, rated load250VAC/10A/16A

2 Supports local circuit switch operation and remote circuit switch operation.

Digital switch input8Input characteristics:

3 Road input, passive dry contact, normally open. Support contactor engagement status detection, alarm for inconsistent input and output status, and alarm for turning on lights during the day and turning off lights at night. Input dry node signal closure alarm, which can be used as illegal door opening alarm, electronic fence alarm, etc.

Multiple timed controlsBuilt in product

4 There are three time schemes: date and time scheme, weekly scheme, and latitude and longitude scheme. Users can choose any time scheme for timing control.

Multi mode control

The cloud platform supports customization and editing of power-saving mode, weekday mode, and holiday mode. Users can choose one or more modes to combine through the computer client to achieve effect control and energy-saving. Users can edit various modes on the computer client and save them remotely to the controller.4855 products support external connectionsThe interfaceDLT-645 07

The reading of regulated electric meters can read parameters such as three-phase voltage, three-phase current, total power, and total energy. These power parameters can be displayed in real-time on the local LCD screen or remotely through client software.4856 products support external connections

7 The illuminance sensor of the interface can collect real-time illuminance values, and the controller can achieve full on, half on, and full off according to natural ambient light.

Local human-machine interface operation

8 A three inch grayscale clear LCD display and touch sensitive operation buttons support local manual light on/off operation when the network is disconnected, local timing scheme setting, device working status display, device operating parameter query and configuration, etc. Network timing function

The product supports network timing function, and the controller automatically synchronizes with the NTP time server on a regular basis to achieve high-precision real-time clock function.

Main technical indicators:	power supply
12VDC 2A	8Switching OutputRoad relay, One normally open and one normally closed node per routeRated maximum load of normally open node10A/250VACThe load type is 16A/250 ACNormally closed node rated maximum load
5A/250VAC	8Switching inputRoad input,
Passive dry node, normally open	communication interfacesupportWIFIWireless communication, supporting any smartphoneWIFI Connect directly and enter the configuration webpage.485support
485Extended communication, capable of connecting external components such as illuminance sensors.	interface（1）supportDLT-645 1997/2007 The reading of regulated electric meters can read parameters such as three-phase voltage, three-phase current, and total electrical energy.（2）Support all the wayRS485
Light control of illuminance sensor.Size (length)wide	High)
160mm90mm58mm	weight
0.45Kg	-20operation temperature℃~
+70	℃
relative humidity	<85%

Pressure Range

80Kpa~108Kpa

Cloud platform interface display:

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content