GDQ9126T Case Wax Removal Ultrasonic Cleaning Equipment Cleaning Process:

Wax removal water coarse washing 1 → Wax removal water coarse washing 2 → Pure water spray cleaning 3 → Pure water cleaning 4 → Pure water cleaning 5 → Acid washing tank 6 → Ultra pure water spray cleaning 7 → Ultra pure water cleaning 8 → Ultra pure water cleaning 9 → Hot air drying 10

GDQ9126T Case Wax Removal Ultrasonic Cleaning EquipmentStructural composition:

This equipment mainly consists of: ultrasonic generatorUltrasonic vibrating plateThe device, circuit control cabinet, cleaning tank, liquid storage tank, liquid storage tank, filtration system, spray system, automatic temperature control heating system, machine base, rack, etc.

GDQ9126T Case Wax Removal Ultrasonic Cleaning EquipmentEquipment Description:

This cleaning machine is a set of manual cleaning and drying equipment, and the cleaning process is manually controlled. It consists of 9 ultrasonic wax removal water cleaning tanks made of stainless steel material, pure water ultrasonic cleaning tanks, citric acid cleaning tanks, ultra pure water ultrasonic cleaning tanks, and a circulating hot air drying tunnel furnace, forming a continuous working device. The cleaning blue containing the workpiece is manually sent to each process section for ultrasonic water-based solution cleaning, multi-stage pure water ultrasonic cleaning, and circulating hot air drying. Finally, the cleaned workpiece is placed on the cutting workbench, and the entire cleaning is completed. The specific structure is shown in the attached diagram and the following detailed explanation.

Introduction to GDQ9126T Case Wax Removal Ultrasonic Cleaning Equipment Fully Automatic Cleaning Line:

Ultrasonic cleaning machineIt has shown great superiority, especially in specialized and group production enterprises, where ultrasonic cleaning has gradually replaced traditional processes such as immersion, rinsing, pressure washing, vibration cleaning, and steam cleaning; The high efficiency and high cleanliness of ultrasonic cleaning machines are due to the penetrability and cavitation impact force generated by the propagation of ultrasonic waves in the medium, making it easy to clean components with complex shapes, inner cavities, and fine voids; For general processes such as oil removal, rust prevention, phosphating, etc., it only takes two to three minutes to complete under the action of ultrasonic waves. Its speed can be several times or even dozens of times faster than traditional cleaning methods, and the cleanliness can also reach high standards. This highlights the use of other treatments to achieve or cannot be replaced in many situations where high requirements are placed on product surface quality and productivity. Therefore, it is absolutely suitable for cleaning clock parts.

GDQ9126T Case Wax Removal Ultrasonic Cleaning Equipment Fully Automatic Cleaning Line Main Features:

1. Use regular tap water, alcohol, or solvents as cleaning solutions.

2. The cleaning effect of high-power transducers is significant and can be observed with the naked eye.

3. After cleaning, the object shines brightly.

4. Digital LCD controls the startup time.

5. The all stainless steel shell, inner liner, and lid make it look more upscale.

6. The waterproof performance has been greatly improved, making the product safer and more durable.

7. Equipped with heating and constant temperature system.

GDQ9126T Case Wax Removal Ultrasonic Cleaning Equipment Fully Automatic Cleaning Line Features:

SUS304/SUS316L/titanium plate, strong corrosion-resistant stainless steel plate, waterproof packaging welding.

2. The radiation surface can be plated with hard chromium to increase hardness and mitigate the effects of weathering corrosion.

3. High Q-value PZT transducer with stable and strong ultrasonic power.

4. The globally unique advanced and stable "KAMSON" digital ultrasonic generator. Shenzhen Spot Ultrasonic Equipment Factory

5. The ultrasonic generator is connected to the shock plate using fiber optic high-frequency shielded wires to prevent skin effect.

6. Customized according to customer requirements, the light spot ultrasonic cleaning machine is manufactured with special specifications, non-standard equipment of different sizes, powers, and frequencies (25KHZ-300KHZ, 1MHZ).

7. Ultrasonic cleaning machines can achieve different control methods according to customer requirements (such as ordinary switch control, PLC weak current control, closed control, remote control, etc.).

---------------------------------------------------------------------------------------------------------------------------------------------

GDQ9126T Case Wax Removal Ultrasonic Cleaning Equipment Fully Automatic Cleaning Line Working Principle:

The ultrasonic cleaning machine amplifies the oscillating signal with a frequency higher than 20kHz through an ultrasonic generator, and then vibrates it through the sound radiation in a clear medium. The instantaneous high-pressure explosion that causes the cleaning solution molecules to vibrate and generate countless tiny bubbles, resulting in thousands of atmospheres of pressure on the surface of the object, is known as cavitation effect. The dirt attached to the surface automatically peels off. Comprehensive cleaning without blind spots is unparalleled by other cleaning methods. And it does not damage the surface of the workpiece.

GDQ9126T Case Wax Removal Ultrasonic Cleaning Equipment Fully Automatic Cleaning Line Cleaning Advantages:

Efficient accuracy

Due to the fact that the acoustic energy of ultrasound can penetrate tiny gaps, small holes, and blind holes, it can be applied for cleaning any component or assembly. When the cleaned parts are precision components or assemblies, ultrasonic cleaning often becomes the only cleaning method that can meet their special technical requirements.

efficient and fast

Ultrasonic cleaning machines are much faster in dust and scale removal of workpieces compared to conventional cleaning methods. The assembly parts can be cleaned without disassembly. Ultrasonic cleaning machines can save labor and the advantage of replacing manual hand washing often makes them the most economical cleaning method.

Consistent wide coverage

Whether the cleaned item is large or small, of any material, simple or complex, single or batch, or in automatic flow line, ultrasonic cleaning can achieve unparalleled uniform cleanliness compared to manual cleaning.

---------------------------------------------------------------------------------------------------------------------------------------------

GDQ9126T Case Wax Removal Ultrasonic Cleaning Equipment Fully Automatic Cleaning Line Product Features:

Adopting bottom vibration or opposite vibration ultrasonic cleaning methods: Each ultrasonic transducer has a power of 60W, 100W, and can be selected from different frequencies such as 20KHz/25KHz/28KHz/40KHz/68KHz/80KHz/120K. The ultrasonic transducer is a Japanese "NTK" brand high-Q piezoelectric crystal transducer, and the ultrasonic cleaning machine has strong power.

Heating power: optional and customizable, heating method: plate electric heating or 304 tube immersion heating. Temperature control range: RT-110 ℃. Using mechanical control or digital display is more precise and accurate.

---------------------------------------------------------------------------------------------------------------------------------------------

GDQ9126T Case Wax Removal Ultrasonic Cleaning Equipment Fully Automatic Cleaning Line Material and Structure:

*Adopting fully imported thickened stainless steel (designed and manufactured with different materials such as 304, 316, titanium plate, etc.), it is acid and alkali resistant, beautiful and durable.

*Imported high-Q piezoelectric crystal transducers and powerful ultrasonic cleaning machines. The cleaning effect is obvious.

*The automatic constant temperature system is adjustable from 30-110 ℃.

*24-hour continuous work, suitable for large-scale production.

Ultrasonic cleaning machine warranty and after-sales service:

All equipment sold by the Light Spot Ultrasonic Cleaning Equipment Factory is covered by a one-year nationwide warranty and lifetime maintenance.24-hour consultation hotline: Zhang Sheng

The GDQ9126T watch case wax removal ultrasonic cleaning equipment fully automatic cleaning line is mainly suitable for degreasing, wax removal, cleaning and drying of precision metal watch cases, watch straps, metal jewelry, high-precision hardware accessories, etc!