The large amount of fine dust and sawdust generated in the production process of woodworking manufacturing not only adheres to equipment and workpiece surfaces, affecting processing quality, causing workpiece scrap or frequent equipment failures, but also pollutes the working environment, leading to silicosis. Therefore, ventilation and air exchange are carried out in the workshop to promptly remove the generated dust and purify the dusty air to maintain the cleanliness of equipment and workpiece surfaces. Woodworking equipment has a simple and compact structure, low steel consumption, and higher capture capacity compared to lighter fibrous dust such as sawdust, shavings, asbestos powder, tobacco, etc. In order to meet increasingly strict requirements for labor protection, environmental protection, and product processing accuracy, woodworking manufacturing enterprises handle the dust generated during the production process.

Furniture factory production line dust collectorThe scope of application is particularly wide, mainly suitable for various woodworking machinery such as four sided planers, sanding machines, sawing machines, slicing machines, and bar grinders. Our company adopts pulse cleaning method, which is flexible, convenient, economical, practical, and aesthetically pleasing. It does not affect production operation and can achieve ideal dust removal effect.

What are the characteristics of the dust collector on the production line of Huiyang Furniture Factory?

1. Dust removal can be achieved

2. A reasonable cleaning procedure and cleaning cycle have improved the cleaning effect of the dust collector and the lifespan of the filter bag

3. The diversification of dust cleaning control methods can be determined according to different working conditions, with different dust cleaning methods; Can achieve composite offline pulse dust cleaning

4. Bag filter, with the correct selection of filter materials and operating conditions, can capture dusty gases without the need for secondary dust removal. The emission concentration is less than 50mg/m3, meeting the allowable emission standards

5. When the bag filter is used for coal powder dust removal, it is also equipped with a device for operation. When used for dust removal on the top of the warehouse, it can be used without brackets, ash hoppers, and ash discharge devices

Design concept of dust collector for furniture factory production line:

When our company designs solutions for each client, the principle is to save investment as much as possible. Due to the high concentration of dust generated during the processing of woodworking equipment, we use the commonly used pulse bag dust removal technology in China to achieve the goal of recovering dust and purifying exhaust gas, so that all emission indicators meet the emission requirements.

Furniture factory production line dust collectorThere are two important technical and economic indicators for dust removal process: investment cost and operating cost. The former is one-time, while the latter is frequent, and its cumulative number can be several times or even tens of times that of the former. And the proportion of electricity consumption and vulnerable parts is high in the operating costs, so it is very important to reduce operating costs. We have summarized the following aspects of innovation compared to other similar equipment in the design of each dust removal process:;

We have designed a soft connection between the dust collector outlet and the fan to mitigate the vibration caused by the high-speed operation of the fan; A muffler is designed at the outlet of the fan to reduce the noise generated by high-speed operation of the fan;

2. For the convenience of maintenance and observation of the dust collector, we have designed a glass observation (maintenance) door at the bottom of the dust hopper of the dust collector; The system pipeline is connected with flanges between 4-6 meters, and a maintenance door is designed around 5 meters; Easy to observe and clean the dust settling inside the pipeline;

3. In response to the hydrophilic characteristics of wood dust, dust is prone to clumping at certain moisture levels, which can cause blockage by arching and bridging in the dust collector hopper. We have designed a vibrator in the dust collector hopper to assist in dust cleaning and reduce the need for manual assistance.

Botou Huiyang Environmental Protection Equipment Co., Ltd. has product equipment, good production technology, a production team, and after-sales service. Our product equipment has been distributed in various places. If you have any questions in this regard, please leave an online message or call Manager Mu for consultation