Fully automatic single stamping machineAutotab 200series

-200/200W/200TR

Fully automatic single stamping machine The touch panel is easy to operate and suitable for1 - 100Tablet testing of tablets

Fully automatic single-layer tablet press200

Input tablet pressure/The tablet thickness and number of tablets will automatically run continuously, and if the pressure is changed, only the set values need to be modified on the touch panel.

Fully automatic double-layer/Triple laminating machine-200W/200TR

Equipped with two or three injection hoppers;

In addition to single-layer tablets, chip encapsulated agents can also be compressed;

You can also operate multiple types of tablets together.

Application:

[medicine]medicine/health products

[chemistry]ceramics/catalyst

Features:

²Easy to operate

Through touch screen operation, numerical values and pressure can be easily controlled, such as pressure, filling depth, upper punch depth, number of tablets, etc. It is very effective for repetitive tablet experiments.

²fully automated

Although the single stamping speed may not be too fast, continuous pressing can be carried out under stable conditions, and the hopper is also suitable for loading very little material.

²Compact structure, easy to install and move

Stylish appearance, simple and clear installation in the laboratory.

²can be usedIPT（TSM）Standard

useIPT/TSM/EUPunch, achieved by replacing the punch and intermediate film to press various types of tablets, including irregular shaped tablets.

²Outstanding practicality

Three side door opening makes it easy to replace the punch, and feeding is very convenient.

²Tablet data can be exported

Regarding compression pressure/Kicking out pressure can be done through the touch panel andUSBConnect and output it toPC(Special connection software needs to be installed).

Double layer tablet press（200W）Triple laminating machine（200TR）

200WThe double-layer tablet press has two feeding hoppers

200TRThe three-layer laminating machine has three feeding hoppers

Set the material filling amount and preloading for the first and second layers (using an upper punch to control the loading thickness of the material).

²Optional air blowing and vacuum cleaning

Suppressing2layer/ 3When layering pills, use air to blow away the residual sample powder on the platform, and then vacuum collect the dust (with a separate dust collector) to reduce contamination of other layer powders.

²Optional Core PackTablet pressing (intra tablet)

In the technical performance of three-layer compression molding, a prefabricated chip feeding unit is used instead of the third layer compression molding (chips need to be prepared separately).

²safety design

Three side doors locked to each other, program controlledThe upper punch and lower punch are notwill happenCollisions.

Technical Specifications Table