Name: Fulaike 2850 water treatment equipment, chemical water treatment, fully automatic water softener, fiberglass winding tank, stainless steel tank
Brand: Xi'an Penghao Water Treatment Equipment Co., Ltd
Availability: InStock

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

18092068818
Address

401 Zhuque Road, Xi'an City, Shaanxi Province

Contact Now

Fulaike 2850 water treatment equipment, chemical water treatment, fully automatic water softener, fiberglass winding tank, stainless steel tank

Fulaik 2850 water treatment equipment is a fully automatic water softener with fiberglass winding tank and stainless steel tank. The principle of the

Contact Supplier

More Products

Product details

Fulaik 2850 water treatment equipment is a fully automatic water softener with fiberglass winding tanks and stainless steel tanks. The principle of the water softener is to automatically control every step of the operation and regeneration of the water softener, and use time, flow rate, or induction to start regeneration. The circulation process of a fully automatic water softener usually consists of the following specific steps. 1. The raw water flows through a container (softener) containing ion exchange resin under a certain pressure and flow rate. The exchangeable ion Na+contained in the resin undergoes ion exchange with cations (Ca2+, Mg2+, Fe2+, etc.) in water to achieve the required Ca2+and Mg2+content in the effluent from the container. 2. After the failure of the backwash resin, it should be backwashed with water from bottom to top before regeneration. The purpose of backwashing is twofold: firstly, to loosen the resin layer that is compressed during operation, which is conducive to the full contact between resin particles and the regeneration solution; secondly, to remove suspended solids accumulated on the surface of the resin during operation and suspended solids on the surface of the resin. At the same time, some broken resin particles can also be discharged with the backwash water. In this way, the water flow resistance of the exchanger will not increase. 3. The regeneration solution flows through the failed resin layer at a certain concentration and flow rate, reducing and regenerating the resin to restore its original exchange capacity. 4. After the regeneration solution is completely replaced, there is still salt solution in the expansion space of the exchanger and the resin layer that has not yet participated in the regeneration exchange. In order to fully utilize this salt solution, clean water with a flow rate less than or equal to that of the regeneration solution is used for cleaning, with the aim of preventing mixing between the clean water and the regeneration solution. 5. The purpose of washing is to remove residual regenerated waste liquid from the resin layer, usually at normal operating flow rate until the effluent is qualified. 6. Add water to the salt tank to meet the required salt consumption for dissolution and regeneration.
Features of fully automatic water softener equipment:
1. High degree of automation and stable operating conditions.
2. Advanced program control device, accurate and reliable operation, replaces manual operation, and fully realizes automatic conversion of various links in water treatment.
3. High efficiency, low energy consumption, and economical operating costs. Due to the reasonable overall design of the softener, the exchange capacity of the resin can be fully utilized. The equipment adopts a jet type salt suction instead of a salt pump, reducing energy consumption.
4. The equipment has a compact structure, occupies a small area, saves infrastructure investment, is easy to install and debug, is easy to use, and has stable performance of operating components.

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content