The Fulaik 2850 sodium ion exchange resin water softening equipment, consisting of fiberglass winding tanks, resin tanks, and water softeners, achieves fully automatic control of every step of the operation and regeneration of the fully automatic water softener, and uses time, flow rate, or sensors to initiate regeneration. Adjust the FLECK Fulaik series fully automatic water softener to use a time synchronous motor to control all working programs. Set the restoration cycle as needed within 7 or 12 days, and select the restoration time within 24 hours. The restoration process can also be adjusted. The Fulai flow type fully automatic water softener adopts flow control for all working procedures, and the equipment can provide continuous (or intermittent) water supply. Regeneration - The regeneration device is automatically started by the flow controller, and the regeneration program can be set as needed. Due to the mature technology and easy operation of the FLECK series fully automatic soft water equipment control system, the use of lead-free brass valve body fully meets food hygiene requirements, and the PTFE coated piston reduces resistance, extends service life, and ensures reliable operation.Equipment control mode:
1. Time type: restoration starts at the set time, with a short cycle of one day, suitable for stable water supply systems such as air conditioning systems. It has the characteristics of simple control mode, low cost, and easy operation;
2. Flow type: It starts to restore when the flow reaches the set value and is suitable for all system water supply. This method has high accuracy, stable and reliable water output, and is equipped with a memory function. There is no need to reset the values after a power outage;
3. Microcomputer type: The system consists of 2-3 automatic water softeners combined, fully controlled by computer programs. If equipped with a central controller, remote control can be achieved. The computer can monitor the working status of each water softener at any time through a microprocessor, display and store information, and randomly set working and regeneration conditions. Suitable for water supply systems with high levels of automation.