This model of corn planter has seven types of rows ranging from two to eight, and the configuration can be assembled according to needs. The accessories are as follows:
1. Trench opener: can be matched with solid, hollow trenchers, and rear corner trenchers are divided into pointed shovel and elliptical trenchers,
2. Fertilizer box: It can be equipped with V-shaped, flat bottomed, perforated, transparent plastic steel, large compartment, small compartment, double compartment, three-layer compartment, and can be driven by a motor according to demand,
3. Seed planter: can be matched with finger clip or spoon wheel seed planter, conveyor belt seed planter as needed
4. Large beam frame: divided into six different angles, it can be assembled with large tractors, medium tractors, and small tractors,
1. The corn planter adopts a dual fertilizer box design, which eliminates the need for manual mixing of fertilizers. Two different fertilizers can be evenly applied to the left and right sides of the corn. 2. The fertilizer box can be moved back and forth in three different positions, which can be adjusted according to usage.
This corn seeder has a four link linkage that can adjust the pressure on the ground according to the actual situation of the plot. You can operate it by selecting the handle.
1. Large seed box: The top of the seed box has a large opening, with a funnel-shaped design. The corn seeds gather at the input port below, and the bottom of the seed box is higher at the front and back, so even a little corn seed will roll into the input port. This new design was introduced in 2016.
The bottom of the fertilizer box is dug down, and the tractor on the ground will evenly distribute the fertilizer on the four fertilizer sowing boxes when it is raised or lowered,
The screws inside the fertilizer box are made of stainless steel and will not be damaged due to the corrosion of the fertilizer.
3. Large fertilizer bins are more suitable for use on large plots of land, with a capacity to add 160 pounds of fertilizer.
1. The rear and front corner trenchers are designed as flat shovel shaped, slightly downward curved long corners. When sowing hard plots, the operation can be drilled into the soil by touching the ground. For example, when sowing from the ground to the edge, the honest trencher is flat and requires someone to step on top of the corn planter to enter the soil. Nowadays, new trenchers reduce the distance of entering the soil compared to old ones, ensuring that every corn seed can be covered with soil.
2. The trencher is solid and will not deform or be damaged when encountering tree roots or bricks or stones during the operation process.
1. The thickness of the suspension accessories connected to the tractor suspension is 8mm, which is made by one-time stamping with large stamping equipment. The welding is firm and will never open. Each suspension connection part has two perforations, one large and one small, which can meet the needs of different types of tractors
2. The screws used to tighten the suspension joint are made of low-carbon alloy steel or medium carbon steel and undergo heat treatment (quenching, tempering). They are high-strength sprockets and bolts in this accessory, so there is no need to worry about weak tightening caused by insufficient torque.
3. The tight U-shaped pendant is firmly attached to the main beam of the corn planter. After tightening with high-strength screws, the fixture will not deform or move, and can also be loosened to move the distance suitable for the use of one's own tractor.
The following is a video demonstration of the four row corn precision seeder:
This corn seeder has anti shape function and can maintain the same sowing depth according to the height of the plot. For example, if one side of the plot is high, the higher side will float upwards to maintain a certain sowing depth, while the bottom of one side will float downwards to maintain the same depth of corn seeds.