This machine adopts a bottom mounted oil cylinder, with low height and light weight, especially suitable for engineering construction departments. It uses electronic force measurement to display the test force time curve, test force, peak value, and yield force with obvious yield characteristics. The experimental data is convenient and intuitive; By inputting the cross-sectional area of the sample, the tensile strength, yield strength, and mechanical properties of the material can be directly measured.

Technical parameters of fiberglass sucker rod tensile testing machine:

Test force (KN)600

Force measurement range4%-100%FS

Test force resolution0.1KN

Stretch space (mm)650

Compressed space (mm)380

Clamping methodManual/automatic clamping

Circular specimen clamping diameter (mm)Φ13-40

Flat specimen clamping thickness (mm)0-15

Flat specimen clamping width (mm)75

Shear specimen diameter (mm)10

Dimensions of upper and lower pressure plates (mm)Φ 160 (alternatively 204 * 204)

Bending pivot distance (mm)450

Distance between two pillars in the stretching space (mm)450

Net weight (kg)2000

Working conditions of fiberglass sucker rod tensile machine:

1. Within the temperature range of 10 ℃ -35 ℃, the relative humidity should not exceed 80%;

2. Install correctly on a stable foundation or workbench;

3. In a vibration free environment;

4. There is no corrosive medium around;

5. The fluctuation range of the power supply voltage should not exceed ± 10% of the rated voltage;

6. The power supply of the testing machine should be reliably grounded; The frequency fluctuation should not exceed 2% of the rated frequency.