VIP member
FPZ plastic self-priming pump
FPZ engineering plastic self-priming pump FPZ engineering plastic self-priming pump is injection molded in one go, with high mechanical strength, stro
Product details
FPZEngineering plastic self-priming pump
FPZEngineering plastic self-priming pumps are injection molded in one go, with high mechanical strength, strong corrosion resistance, and unique scientific structure. The pump chamber is equipped with a suction chamber, a storage chamber, a return check valve, a gas-liquid separation chamber, and a return hole. It only needs to be filled with liquid before the first start-up, and there is no need to repeat the liquid filling in the future. When suctioning the medium, the liquid can be intermittent. Within 15 minutes of liquid interruption, the liquid can continue to be suctioned. The mechanical seal does not require additional cooling water, and is easy to operate, safe, and leak free. It is the best product to replace the submersible pump.
The pump is made of non-toxic and pollution-free materials, reinforced with polypropylene RPP (suitable for temperatures ranging from -14 ℃ to 100 ℃), ABS, and UPVC for one-time injection molding.
FPZPerformance parameters of self-priming pump for engineering plastics:
model |
internet traffic m3/n |
lift mm |
Self priming height m |
self-priming time s/m |
power kw |
Entrance and exit caliber mm |
Connection form with motor shaft |
25FPZ-10 |
2.5 |
10 |
3 |
60 |
0.75 |
1 1/2 |
Direct connection type |
32FPZ-11 |
3.5 |
11 |
3 |
60 |
0.75 |
1 1/2 |
Direct connection type |
40FPZ-18 |
11 |
18 |
4 |
60 |
1.5 |
40/30 |
Direct connection type |
50FPZ-20 |
13 |
20 |
4 |
60 |
2.2 |
50/40 |
Direct connection type |
65FPZ-28 |
20 |
28 |
4 |
60 |
4 |
65/50 |
Direct connection type |
80FPZ-30 |
50 |
30 |
4 |
60 |
7.5 |
80/65 |
Direct connection type |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-