FLOM Freeze Drying Machine FL1600 Technical Parameters:

FLOM freeze dryer performance characteristics:

1. International standard vacuum pump interface, can be connected to different brands of vacuum pumps
2. Insulation cover sealing design reduces cooling loss during pre freezing process, saves energy, and has no condensation
3. Using imported brand compressors, with low noise and large cooling capacity, adopting self cascade refrigeration technology, the cold trap temperature is lower, and the performance is more reliable
4. Efficient air-cooled condenser with aircraft blades based on aerodynamics to enhance heat dissipation and save energy
5. Equipped with historical data query function, storing historical work data from the past month; No additional software required, simply insert a USB flash drive to export current and historical data
6. The pre freezing rack can be used as a material pre freezing and drying rack, or as a guide bucket to accelerate the drying speed; Transparent bell shaped drying chamber, safe and intuitive
7. Stainless steel material rack with adjustable spacing, suitable for freeze-drying of various materials
8. The cold trap has a large opening and no inner disc tube. The cold trap can pre freeze the sample. The cold trap is seamlessly welded, mirror polished, and has a rounded bottom design for easier cleaning
9. The cold trap and countertop are made of stainless steel, which is corrosion-resistant and easy to clean

To ensure that the vacuum freeze dryer can achieve the desired freeze-drying effect and extend its service life, please pay attention to the following matters.
The operating environment temperature and humidity of the freeze dryer should be maintained at 10 ℃ -30 ℃, and the relative humidity should be less than 80%
The working environment of the freeze dryer should be used in an environment without conductive dust, explosive, corrosive gases, and strong electromagnetic field interference.
When the cumulative working time of the vacuum pump reaches 200 hours or the color of the vacuum pump oil turns brown, the pump oil should be replaced in a timely manner. Prevent the vacuum pump from malfunctioning.
Do not frequently switch on or off the refrigerant. After the refrigeration unit is shut down, wait for at least 3 minutes before restarting to prevent damage to the refrigerant.
When shutting down, inflate first and then turn off the vacuum pump to prevent the sample from being contaminated by oil returning from the vacuum pump.
The connection between the organic glass drying bucket and the host is sealed with a silicone sealing ring, which should be kept clean to prevent scratches. Organic glass cannot be wiped with organic solvents.
After using the freeze dryer, the moisture inside the cold trap should be wiped clean.