VIP member
Product details
Amplitude modulation and phase modulation
High performance, compact and exquisite structure
Broadband DC coupling
2mm input aperture
SMA input interface
DC-100MHz bandwidth
Product parameters:
| type | Amplitude Modulator EO-AM-NR |
phase-modulator EO-PM-NR |
| crystal | Lithium niobate (LiNbO3) | |
| wavelength | ||
| C1 | 600 - 900 nm | 600 - 900 nm |
| C2 | 900 - 1250 nm | 900 - 1250 nm |
| C3 | 1250 - 1650 nm | 1250 - 1650 nm |
| C4 | 400- 600 nm | 400 - 600 nm |
| aperture | 2 mm | 2 mm |
| Input Interface | SMA Female | SMA Female |
| Half wave voltage, V π | 360 V @1064 nm(Typical) | 240 V @ 1064 nm(Typical) |
| Maximum Power density | 2 W/mm2 @ 532 nm, 4 W/mm2 @ 1064 nm |
2 W/mm2 @ 532 nm, 4 W/mm2 @ 1064 nm |
High voltage amplifier:
| The Thorlabs high-voltage amplifier HVA200 is specifically designed to drive Thorlabs' electro-optic modulators. Its output voltage is ± 200 V, output current is 100mA, bandwidth is 1MHz, and low noise. |
Product parameters
| model | HVA200 |
| Output voltage | –200 - 200 V |
| maximum output current | 100 mA DC |
| Maximum input voltage | –10 to 10 V |
| Input impedance | 1 kΩ |
| Output Impedance | 50Ω |
| Input Interface | BNC |
| output interface | BNC |
| HV monitoring interface | BNC |
| Output noise | 1.5 mV RMS |
| Gain | –20 ± 2% |
| DC bias voltage range | –200 to 200 V |
| HV Monitor to Output Ratio: | |
| Input impedance 50 Ω | 40:1 (Vout/40 ± 6%) |
| Input impedance>10 k Ω | 20:1 (Vout / 20 ± 6%) |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-