●　 ARM926ES-J CPU，454MHz（NXP i.MX283 /

i.MX287）

128MB DDR2 system memory, with user available space greater than 110MB

256MB FLASH memory, user file space greater than 128MB

● Supports high-capacity data storage with external SD card (SDHC) and USB flash drive

● Independent real-time clock RTC with power down protection function

Hardware watchdog (WDT) to prevent system deadlocks

● Dedicated debugging serial port (115200, 8-N-1)

● 2 Ethernet interfaces, 10M/100M adaptive

● Two CAN bus interfaces, multiplexed with GPIO pins

5 standard UART serial ports, with a baud rate of up to 3Mbps

1 I2C interface, main control mode, maximum baud rate of 400kbps

● 1-channel 4-wire SPI interface, main control full duplex, maximum baud rate of 12Mbps

● 4-channel USB high-speed host interface (HOST), supporting virtual serial port devices

●1 USB OTG interface

Display unit

Universal Digital IO

TFT color LCD interface, 18 bit parallel RGB format

Supports resolutions ranging from 320 × 240 to 1024 × 768

● Supports 4-wire resistive touch screen

32-bit general-purpose GPO0 – GPO31, independently controllable in all directions

Partial GPIO and some standard interfaces of the system reuse pins

Partial GPIO and SD interface reuse pins

GPO24 and GPO25 support external interrupt triggering function, with effective rising edge

● 3.3V LVCMOS level

After power on/reset, GPIO defaults to digital input mode

Other functional interfaces

Power supply and module mechanical parameters

Measurement of Mainboard Power Supply Voltage and Mainboard Temperature

Power supply voltage:+5V ± 10%, typical operating current: 200mA

RTC backup battery voltage: 3.0V

Working temperature: -10 ℃ to 60 ℃; Industrial grade (-40 ℃ to 80 ℃) optional

ESMARC architecture, motherboard dimensions: 74mm × 54mm

Two 3 × 22 core sturdy IDC sockets (2mm spacing) are placed on both sides of the module

● Anti reverse insertion mechanism

WinCE platform software environment

Linux platform software environment

● Provide corresponding SDK development packages, including various interface driver APIs

● Support VS2008/VS2013 application integration development environment

Adopting the BinFS file system, the startup time has been reduced to 10 seconds

● Support debugging of Ethernet port (TCP/IP) application source code

● Support source code debugging and file management for applications using ActiveSync mode

● Supports regular network applications such as Telnet, FTP, and Web

Pre installed Modbus protocol (including Modbus/TCP)

● Support Microsoft's remote toolset

● Support users to modify the startup screen by themselves

● Provide typical application reference program source code

UBIFS root file system, with a startup time of approximately 8 seconds

Eclipse Application Integrated Development Environment Based on Windows Platform

NFS based on the Windows platform makes program debugging extremely convenient

● Support conventional system debugging and management methods such as Telnet and FTP

● Support users to modify the startup screen by themselves

Pre installed SQLite3 database

Pre installed Modbus protocol (including Modbus/TCP)

● Source code of various typical application-oriented application frameworks