● Front view

Operating systems and development tools
| operating system | development environment | programming language | ||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|||
| Linux | Eclipse | QtCreator | Visual Studio | C/C++ | Java | Python | .NET C# | |||
● Technical indicators
Core Unit |
Display unit |
|
● i.MX8MM, 64 bit quad core Cortex-A53 processor ●CPU clock speed: 1.8GHz (commercial grade)/1.6GHz (industrial grade) ● 2GB DDR4 system memory, 16GB eMMC high-speed memory ●Independent hardware real-time clock (RTC), power down time protection ●Hardware watchdog (WDT) to prevent system deadlocks ●Dedicated debugging serial port (115200, 8-N-1) |
18 bit/24 bit LVDS display interface, with single and dual channel modes ●Dual channel LVDS supports 1920x1080 high-resolution display ●Supports 4-wire resistive touch screen and capacitive touch screen with multi touch capability ● Multiple formats of videosHardware encoding and decoding, supporting 1080p60 2D/3D graphics accelerator, supporting OpenGL ES 2.0 |
Communication interface configuration |
Universal Digital IO |
|
● 1 Gigabit Ethernet interface+1 100Mbps Ethernet interface ●2-channel CAN bus interface, supporting CAN2.0B and CAN FD, maximum Baud rate of 8Mbps, multiplexed with GPIO pins ●12 standard UART serial ports, with a maximum baud rate of 5Mbps ●1-channel I2C interface, main control mode, baud rate 100kbps/400kbps, Reuse pins with GPIO ●1 SPI interface, main control full duplex mode, maximum baud rate 52Mbps, Reuse pins with GPIO |
32-bit general-purpose GPO0 – GPO31, independently controllable in all directions ●Partial GPIO reuse pins with other system functions ●When GPIO signal is used as input, it supports level change interrupt triggering function ●After power on/reset, GPIO defaults to digital input mode |
Data storage interface |
Power supply and module mechanical parameters |
|
USB 2.0 main control interface: 4-channel (ESM8000)/3-channel (ESM8100) ●1 USB OTG interface (ESM8000 only) ●PCIe x 1 high-speed interface supports M.2 NVMe solid-state drive (ESM8100 only) ●SD card interface, supports up to 32GB SDHC format storage card (SD card interface) Reuse pins with GPIO |
Power supply voltage:+5V ± 5% ●Mainboard power supply voltage detection, mainboard and CPU temperature detection ●Working temperature: industrial grade -40 ℃ to 80 ℃; Commercial grade 0 ℃ to 60 ℃ ●ESMARC architecture, motherboard dimensions: 74mm × 54mm ●Two 66 core sturdy IDCs with three rows of female wires (2mm spacing) symmetrically distributed in the module On both sides |
● Model comparison
● Mainboard schematic diagram

● Configuration Options Diagram

● Installation diagram









