●FreescaleCortex-A7 CPU i.MX6ULL with 528MHz main frequency

●128MB DDR3 system memory, user available space of approximately 100MB

●256MB NandFlash storage, user file space greater than 128MB

●Optional support for 4GB eMMC memory (not supported when using eMMC)

　 Holding NandFlash

●1 USB port, supports USB flash drive plug and play

●SD card interface, supports SDHC format storage (up to 32GB)

●Independent real-time clock RTC with time data power-off protection

●Hardware watchdog (WDT) to prevent system deadlocks

7 standard UART serial ports, of which 6 can be used by users, with a baud rate of up to

3Mbps

TtyS1/ttyS3/ttyS4 are 3-wire TTL levels

TtyS2 is 3Wired system, RS232/TTL optional

TtyS5/ttyS6 are3TTL level in wired system,Reuse pins with GPIO

Debugging serial port fixed parameters: 115200bps, 8-N-1

Other communication interfaces

Display unit

● 1 Ethernet interface, 10M/100M adaptive

●1-channel USB high-speed host interface (HOST)

●1 USB OTG interface

●1-channel I2C interface, main control mode, maximum baud rate of 400kbps,

　 Reuse pins with GPIO

●1 SPI interface, main control half duplex mode, maximum baud rate of 10Mbps,

　 Reuse pins with GPIO

The default configuration is TFT color LCD interface (6 bits each for RGB+synchronous clock)

　 Signal)

●Color display, with resolutions ranging from 480 × 272 to 1024 × 768 that can be configured

　 (Using CN3)

●Support 4-wire resistive touch screen

Digital and analog monitoring unit

Power supply and module mechanical parameters

12 bit general-purpose GPO0-GPO11, with independent and controllable input and output

● Support real-time monitoring of motherboard ambient temperature and power supply voltage

Power supply voltage:+5V ± 5%, average working current 130mA

Working temperature: -10 ℃ to 60 ℃; Industrial grade (-40 ℃ to 80 ℃) optional

Module dimensions: 40mm × 50mm, board to board height: 5.5mm

PCI-e module size standard, 52 core gold finger plug

●Independent LCD display interface, FPC0.5-40 flat ribbon socket