Dust collector for rock wool board factoryIt is a new type of dust collector developed based on the characteristics of large waste gas volume, dust content, and light dust density in the artificial board industry. After repeated investigation and research, and drawing on the experience of the company's fiberboard production line supporting dust collectors, it has the characteristics of small volume, large processing air volume, compact structure, and easy use. This device has a significant dust removal effect on lighter dust particles such as artificial board sanding powder, fibers, etc. At the same time, it ended the history of domestic manufacturers' inability to match 150000 to 200000 m3 medium fiber board production lines with dust collectors.

sinceBag type pulse dust collector for rock wool board factoryHow should users maintain our devices based on their usage and positive feedback? Let me introduce it below, hoping it will help you!

When maintaining and repairing such equipment, the power and gas sources should be cut off and the gas bag should be kept at normal pressure. When carrying out maintenance and repair inside the dust collector, the dust inside should be cleaned up and left to stand before repeated cleaning. There should be no dust inside, and open flames are strictly prohibited when setting up lighting. Fire extinguishers should be installed on site to prevent dust explosion accidents.

① Establish a regular maintenance system to promptly identify problems and prevent major accidents from occurring.

② It is strictly prohibited to stack flammable and explosive materials around the bag pulse dust collector in the rock wool board factory, and the ventilation should be good.

③ Regularly check the sealing status of the bag pulse dust collector in the artificial rock wool board factory and the operating status of the air network (including the fan).

④ Regularly inspect the dust removal filter bag, replace it in a timely manner if it is damaged, and store the spare dust removal filter bag in a dry, ventilated and dust-proof manner, and regularly inspect it.

⑤ Regularly clean impurities and accumulated water from the source processor.

⑥ Regularly refuel the transmission device, pay attention to dust prevention after refueling, and install sealing gaskets when closing the inspection port.

⑦ Keep the pulse controller and solenoid valve of the bag type pulse dust collector in the rock wool board factory clean, free of dust and oil stains, and regularly check the control coil on the solenoid pulse valve.

⑧ The bag pulse dust collector equipment and dust layer on the surface of the air duct in the artificial rock wool board factory should be cleaned immediately.