Detailed Introduction

Product Introduction:

Scope of application: 1. Industry: textiles, printing, tobacco, electronics, etc. 2. Agriculture: livestock, flowers, etc
Operation capacity 1. Uniform humidifying fog Jiabao spray system adopts two fluid mixing technology. The droplet particles are controlled at 5-10 microns, with an average of 7 microns. It belongs to dry fog, uniform without leakage, and the atomization efficiency is more than 99%. Although the equipment is small, the humidifying capacity is large: 11kg/h
2. During the atomization process, water molecules collide with each other at high speed, producing a large amount of negatively charged oxygen ions. By utilizing the principle of positive and negative attraction, a large number of dust particles in the air can be adsorbed and aggregated, and then transformed into dust particles.
3. A large number of negative oxygen ions, neutral and positive charges are generated in the process of electrostatic spray to eliminate static electricity; After the humidity increases, it can reduce the generation of static electricity

Principle of Aerosol Humidifier:

1. Principle of Humidifier
The humidification system operates based on the principle of vacuum siphon, generating ultrafine mist from a two-stage atomization system. In a two-stage atomization system, the air-water mixture is sprayed from the holes to achieve a single atomization; Then mix it completely with the gas coming out from the nearby nozzle to achieve secondary atomization. Adjust the compression ratio of water and air as required to obtain the spray effect; Spray particle size: 5 μ m-10 μ m

2. Characteristics of humidification system

Compact, but with better humidification performance, lighter weight, shorter overall length, and better performance compared to similar products. The visually soft appearance, circular design, avoids disrupting indoor harmony.
3. Energy saving and maintenance free
The consumption of compressed air is only equivalent to 60% of similar nozzles in China, which is more energy-efficient and environmentally friendly. Maintenance free and long-lasting.
4. System features
Good atomization effect, special vacuum valve design, compressed air negative pressure induced humidification. Automatic control system to better display the humidity within the humidification area. Multiple protective devices ensure that the nozzle does not drip or spray water. Easy and fast installation, spray direction can be adjusted at any angle, good performance, and long service life. The mixed design of air and water routes solves the problem that the nozzle of the traditional spray process is easy to block. Two stage atomization system, the uniformity of spray particles, and the extremely fine water mist can quickly evaporate to avoid the occurrence of wetland phenomenon.

Performance parameters:

High effectiveness of application examples:

A、 Textile, reducing thread breakage, minimizing fiber membrane bending during spinning, reducing raw material yarn entanglement on machines, eliminating static electricity and dust removal, etc.
B、 Electronic and semiconductor original device factories, LCD factories, PCB factories, IC testing factories, etc. use space anti-static measures to prevent static damage, electrostatic adsorption, and electromagnetic interference.
C、 Printing reduces the occurrence of printing errors, uneven coloring of documents, paper warping, and other phenomena, reduces the trouble of paper transportation, and improves the clarity of color printing.
D、 Tobacco, humidity control and dust reduction in tobacco processing and production.
E、 Papermaking aims to reduce blockages caused by unevenness during the transportation of standardized paper, prevent small particles from catching fire, eliminate static electricity, and reduce dust.
F、 Planting is used for humidity control of flowers and fungi, with extremely fine mist droplets to ensure that the leaves are not wet and the humidification is uniform. G · Spraying, humidity control in automotive painting factories and various spraying factories to avoid floating dust in the air and reduce defective products caused by electrostatic bonding.

What is the effective area of Wujiabao?

The effective area of four nozzles for humidification in Wujiabao can reach over 100 square meters.

2. Will fogging affect surrounding devices?

Due to the fact that Wujiabao is a mixture of air and mist, the droplets are extremely fine and will not cause wetland phenomena or water droplet condensation after continuous operation for 24 hours. Therefore, it will not have an impact on surrounding devices.

What is the pressure of a single Wujiabao? What is the typical power required for an air compressor? Does it consume a lot of electricity and increase costs?

(1) The pressure of Wujiabao can be adjusted according to customer requirements, and we recommend a pressure of 3-4 bar.

(2) When choosing an air compressor, it is necessary to select an air compressor with a matching volume based on the number of equipment in Wujiabao and its total air consumption. If the factory itself has a gas station, there is no need to choose an air compressor separately.

(3) Using Wujiabao can quickly increase humidity. Generally speaking, with enough Wujiabao according to the area, the humidity can reach 80% within five minutes. This makes it easier to turn on textile equipment, thereby increasing production and reducing production costs. Therefore, compared to electricity consumption, the cost will be significantly reduced.

4. Will long-term use of Wujiabao cause harm to people? (Hidden diseases such as rheumatism)

Wujiabao is a mixture of gas mist and does not cause water condensation, so it will not bring unpleasant feelings to people.

What is the humidification effect of Wujiabao?

In a 100 square meter indoor environment, Wujiabao can reach 80% humidity within 5 minutes and 100% humidity within 10 minutes.

6. Will consumables and maintenance be troublesome in the later stage?

Due to the special material used by Wujiabao, there are no vulnerable parts or consumables generated during use. We can provide a three-year warranty period, and the product can be used for at least 10 years.

7. Are there any requirements for water quality? Is the nozzle particularly prone to clogging?

(1) Wujiabao is a low-pressure spray, so there is no requirement for water quality, and ordinary tap water can be used.

(2) There is a filter inside the device that can filter out impurities in water. In addition, we have small tools on the device itself that can unclog the nozzle.

How to control temperature and humidity when using Wujiabao in the workshop?

The workshop can install temperature and humidity automatic sensing equipment to automatically control temperature and humidity according to production requirements.

Why is Wujiabao so tall?

The spray volume area of a single fog jiabao can reach more than 100 square meters, and the fog volume is very small, which will not cause damage to the surrounding equipment. The low-pressure spray can directly use tap water, with fast humidification speed and no maintenance cost, which can reduce production costs and increase work efficiency. The equipment itself has a three-year warranty period, which allows customers to have no worries.

10. What is the difference between low-pressure and high-pressure spray?

High pressure spray is spray through water pressure. It needs to install a pressure device and use pure water. In addition, high pressure is easy to cause impurities in the water pipe and block the nozzle, while low pressure spray does not need water pressure and is simpler and more convenient to install. The equipment itself has a filter screen, which will not block the nozzle.