Dongfeng Jingguan 4LZ-4.1A (HC868G) tracked full feed harvester product introduction

Easy to operate and comfortable to work with

Flexible operating handle
One handle can achieve the upward, downward, left-right, and directional correction of the harvesting section.

HST transmission
Adopting a non clutch and infinitely variable transmission device, one handle can easily operate forward, backward, and stop, and can be freely operated from * * low speed to * * high speed.

Pulling wheel operation switch
There is a pull wheel operation switch set next to the operating handle, which allows users to operate the pull wheel without leaving their hands. The operation is simple and convenient.

Equipped with a high-powered engine

Equipped with a vertical water-cooled 4-stroke 4-cylinder direct injection turbocharged high-power diesel engine, with a maximum operating speed of 1.9m/s, it can perform powerful harvesting operations even in harsh environments.

■ Increase and lengthen the threshing drum

Adopting a longitudinal flow cylindrical rod tooth threshing system, with a 620 * 1800mm large-diameter extended new threshing drum! Excellent threshing performance, minimal damage to crops, clean selection, minimal scattering, and can perform high-efficiency and high-precision threshing operations.

■ Harvesting reversal device

During the harvesting process, when there is a blockage in the feeding channel of the cutting table, this reversing device can be used to easily discharge the blocked crops, making the operation simple and convenient, and improving work efficiency.

■ Raise the chassis and widen the tracks

High floor design, with a small ground clearance of 305mm and widened tracks (standard 450mm and optional 500mm), providing superior wet and rough field fast passing performance.

Large capacity grain silo

Adopting a large capacity grain silo of 1200L (672kg) reduces the cost of manual bagging and enables continuous and efficient operations in large fields.

■ High position extended grain conveying arm

By using an extended and rotatable grain conveying arm, long-distance high-speed unloading can be carried out, greatly saving manual unloading time. The operation of the grain conveying arm can be carried out from the operating seat, and the operator can easily and quickly unload the grain without getting off the machine.

Complete optional equipment ensures fast and comfortable receiving operations!

• Cutting knife: The cutting operation of receiving rice stalks is also very convenient.
• Rapeseed device: capable of receiving rapeseed.
• Grass cutter: Crush straw, evenly spread it back to the field, and improve soil nutrient content.

Technical parameters of Dongfeng Jingguan 4LZ-4.1A (HC868G) tracked full feed harvester