1、 Introduction to DaoTalk Bluetooth positioning base station

VDB1612 is a beacon with a battery that can last for over 10 yearsDaoTalk Bluetooth positioning base stationIt is commonly used for applications such as electronic fences, location tracking, and information push in harsh outdoor environments. Bluetooth road stud base station is essentially aBluetooth beaconCompatible with Apple iBeacon protocol and Google Eddystone protocol, supports configuring iBeacon mode and Eddystone mode through mobile app.

This DingTalk Bluetooth positioning base station uses the BLE low-power Bluetooth broadcast method to continuously send undirected broadcast packets on channels 37, 38, and 39 using the universal attribute configuration file supported by the beacon. The broadcast content of Bluetooth road stud base stations can be read by the APP "Skylab_xbeacon" developed by our R&D team, including UUID, Major, Minor, RSSI and other information.

2、 Characteristics of road stud base station

*Compatible with iBeacon protocol and Eddystone protocol;

*The maximum broadcasting range can reach 100 meters;

*The DaoTalk base station has an ultra-low power design, which can achieve an ultra long battery life of over 10 years (typical value);

*IP68 waterproof and dustproof, not afraid of wind and rain erosion, supports outdoor ground deployment, and can adapt to various harsh installation and use environments;

*5-ton compressive strength, sturdy and durable, with no damage from car crushing;

*Support flexible configuration and modification of internal parameters of road stud base stations through mobile apps, such as uuid, major, minor, broadcast interval, power, etc;

*The road stud base station supports the cutting of switch wires;

*High level protection, waterproof, dustproof, shock resistant, and resistant to motor vehicle crushing, etc;

*The road stud beacon supports OTA wireless upgrade;

*Compliant with RoHS (lead-free), FCC, and CE certification standards.

3、 Application of Bluetooth road studs

The VDB1612 Bluetooth positioning base station is commonly used in scenarios with special working environment requirements, such as the following:

*Using road stud positioning base stations for shared bicycle ground electronic fences;

*Develop smart parking applications, parking lot monitoring, etc;

*Used in Bluetooth positioning systems;

*Information push;

*Identity recognition;

*Shake WeChat.

4、 Internal Introduction of VDB1612

VDB1612 is developed based on Nordic BLE Bluetooth 4.2 chip. The road stud beacon is powered by two ER18505 batteries and adopts advanced power consumption control algorithms and power supply design methods,Under default configuration, the road stud beacon can achieve ultra long battery life, with a battery life of over 10 years,Durable and long-lasting.

5、 Battery life

According to the calculation of a single ER185053800mAh, the battery life of the road stud base station VDB1612 is shown in the following table:

The above data may vary due to different environments and does not include battery loss.

Attention: The broadcast distance is the result of outdoor open distance testing, and indoor scenes may have attenuation effects due to the complex electromagnetic environment. Please test the broadcast distance based on the actual deployment situation, and adjust the transmission power to reduce the broadcast distance and achieve the goal of extending the service life.

6、 Hardware parameters of DaoTalk base station

The hardware parameters of Beacon road stud base station VDB1612 are shown in the table below

7、 Appearance of road stud beacon

The appearance of the road stud beacon is shown in the following figure:

8、 Configure the parameters of the road stud base station in the mobile app software

Skylab_xbeacon is a Bluetooth Beacon software developed by the Skylab R&D team, which can be used to configure the VDB1612 Bluetooth positioning base station of the road stud. The road stud base station is compatible with iBeacon protocol and Eddystone, and supports configuring both iBeacon and Eddystone modes. This mobile app can be used to flexibly configure common parameters of the base station.

（1） IBeacon mode

Scan the surrounding Bluetooth road stud beacons with your phone, find the Bluetooth road stud positioning base station that needs to modify parameters, and then connect to the base station.

You can modify the name of the Bluetooth beacon in the mobile app UUID、Userservicedata、Major、Minor、 Reference correction power, transmission power, broadcast interval, connection password, etc.

（2） Eddystone mode

In the app, you can easily switch between iBeacon and Eddystone modes. After switching to Eddystone mode, the URL and OtherSetting parameters of the road stud base station can be modified through the app.

9、 Purchase road stud base station VDB1612

You can search for it on Alibaba (1688)“Micro Energy Information”Enter the official Alibaba store of Weineng Information and log in with your Taobao or Alibaba account to make purchases.

Kind reminder: The store price is for reference only, and the actual price is subject to the official quotation provided by the salesperson!

10、 IBeacon beacon base station selection

The iBeacon beacon base station currently launched by 95power is shown in the following figure. Please click on the product image to enter the corresponding beacon detail page for selection.

Shenzhen iBeacon road stud beacon base station source manufacturer, Shenzhen Weineng Information Technology Co., Ltd., official website: