English

Guangdong Kebao Experimental Equipment Co., Ltd
Home>Products>Damp heat alternating test chamber
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13732586353
  • Address
    No.15 Shihuan Road, Dongcheng District, Dongguan City, Guangdong Province
Contact Now
Damp heat alternating test chamber
Brief description: The wet heat alternating test chamber provides environments of high temperature, low temperature, high humidity, and low humidity t
Product details

Damp heat alternating test chamber

Damp heat alternating test chamberTechnical Specifications

model

DB-TH-S-800G. Z.D

Inner box dimensions

W×H×D :1000×1000×800(mm)

outer box dimensions

W×H×D :1500×1850×1400(mm)

temperature range

G: -20℃— 100℃(150℃) Z: -40℃— 100℃(150℃) D: -70℃— 100℃(150℃)

humidity range

20% RH—98% RH

Control stability

Temperature ± 0.5 ℃, humidity ± 2.0%

uniformity of distribution

Temperature ± 2.0 ℃ Humidity ± 3.0%

heating rate

3℃/min (approximately 25 minutes from -40 ℃ to 30 ℃) Nonlinear no-load

降温速率

1℃/min (reduced from 30 ℃ to -40 ℃ for about 70 minutes) Nonlinear no-load

temperature limit

Zui high temperature 150 ℃ Zui low temperature -70 ℃

?refrigeration system

compressor

*French "Taikang" brand fully enclosed compressor

condenser

Fin type attached platform dispersing hot air fan

evaporator

Fin type multi-stage automatic load capacity adjustment

expansion valve

Danfoss components from Denmark

refrigerant

Imported environmentally friendly refrigerant R404A from the United States

Refrigeration auxiliary components

Desiccant (Denmark), oil separator (USA), refrigerant window (Denmark), solenoid valve (Japan), filter (Japan), pressure controller (Korea), shut-off valve (Italy) and other refrigeration accessories are all imported parts constant temperature and humidity chamber

product structure

Inner box material

SUS #304stainless steel plate

outer box material

SUS #304stainless steel plate

Insulation material

Hard Polyurethane foam+glass wool

humidifier

Design of Split Type Humidifier Cylinder

Wind turbine

1 motor/stainless steel extended shaft/multi wing fan blade aluminum alloy wind wheel (SIROCCO FAN)/special adjustable hundred page air supply circulation system

door of the box

Single door, double-layer door, embedded non reactive flat handle/four layer vacuum tempered glass enlarged window/electric automatic defogging, imported "PHILIP" lighting tube

Humidity system

15L stainless steel water tank inside, 1 unit/1 automatic water supply pump (automatically delivering water from the lower tank to the upper tank)/water recovery device/water shortageAlarm device

packing

Silicone foam tightening 1 strip

shelf

There are 2 height adjustable stainless steel shelves inside the box (material: SUS # 304 stainless steel)

heater

Stainless steel fin type heat sink U-shaped heating tube imported from Taiwan, China

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!