Equipment Introduction
This machine has a wide range of applications, and can be used for drying various sheet, granular puffed foods and other smaller shaped materials.
The machine adopts a stainless steel mesh belt reciprocating operation mode inside, which can not only increase the material capacity and reduce the machine's footprint, but also evenly arrange the materials and improve the drying rate of the materials. This oven uses low-cost electricity as the heating source, which is convenient, fast, clean, and has less pollution to the surrounding environment. Extend the length of the oven for better drying effect.
　　Equipment Structure Diagram

　　Technical Specifications:
Drive power: 0.75KW
Heating power: 36KW
Speed: 1-1500r/min
Speed regulation method: slip speed regulation
Dimensions: 6700 × 1150 × 1750mm

　　Operation process:
1. Place the oven on a flat and sturdy ground. First, install the ventilation pipes of the air supply fan. Adjust the distance between the three-layer oven and the air supply fan according to the length of the air supply pipe until it is suitable.
2. Equipped with 380V three-phase four wire (BVR10mm × 4), 100A wall air switch, power on, and connect the wiring terminals on the oven to the corresponding positions in the control cabinet.
3. After connecting all the terminals, turn on the power and test run to observe whether the direction and speed of the mesh belt meet your requirements.