DEBONT pointer type large sprinkler irrigation machine-Global supplier

No.10 Ronghua South Road, Beijing Economic and Technological Development Zone, Ronghua International 3-1609

Outstanding cross body and tower structure design
Widened central pivot point
Anti rollover tower
 Truss guard plate
 Truss tie box
Tower Link
DYP-500 Advanced Surface Treatment Technology
Hot dip galvanizing:
In order to meet the requirements of different crops, terrain, and water quality, our newly designed CircleMaster DYP-500 is defined as a combination of spans and cantilevers of different lengths, while Poly Line is defined as a combination of spans and cantilevers of polyethylene lining pipes of different lengths. All components of the above two combinations are hot-dip galvanized.
Polyethylene lined pipe:
Our polyethylene liner is a solution that can replace hot-dip galvanized pipes. The combination of durable polyethylene liner and high-strength galvanized outer pipe can eliminate all problems caused by corrosive water quality such as acid or alkali during irrigation.
DYP-500 Control Panel
Optional:
Automatic shutdown function: It automatically stops the machine at a pre-set position.
Automatic restart function: Automatically restart the system after power is restored.
Automatic reverse function: When the machine reaches the predetermined location, it automatically changes the direction of operation.
Low voltage automatic shutdown function: If the system loses voltage, it will automatically shut down.
Low temperature automatic shutdown function: When the temperature drops below the pre-set temperature, it will automatically shut down.
Lightning arrester: to avoid damage to the electrical parts of the machine caused by lightning.
DYP-500 Advanced Surface Treatment Technology
DYP-500 collector ring
The industry standard collector ring adopts a sealed design (designed to isolate from the environment).
The collector ring is installed on a stainless steel J-shaped pipe with advanced wedge sealing and above the spraying system to ensure that there are no problems for many years.
DYP-500 Tower Box
The tower box is composed of a white thick walled UV resistant injection molded shell and a galvanized steel plate bracket, mainly including a stainless steel cam rod, an adjustable, moisture resistant micro switch, and a rigid base. The oversized cam spring ensures the consistency of the entire system while reducing structural stress.
DYP-500 Power Transmission System
Powerdrive system
Wheel reducer
Motor reducer
Transmission universal joint
DYP-500 translation system
Equipment operating trajectory: straight line.
Cross body parameters: Same pointer sprinkler.
Equipment length: Standardized design, the number of spans and the length of the entire system can be designed by Linghuodi according to the site conditions.
Land use: Medium or large rectangular land parcels.
Main advantage: High land coverage.

Equipment length (determines irrigation area)Recommended maximum length up to 800 meters
Cross body length and weightThere are 5 options available: 38.2 meters (1352 kilograms), 50.1 meters (1572 kilograms), 56.1 meters (1667 kilograms), and 62.0 meters (1761 kilograms).
Cantilever heightThere are 11 options available, including 1.8 meters, 3.6 meters, 5.9 meters, 7.8 meters, 9.5 meters, 11.9 meters, 13.7 meters, 17.8 meters, 19.7 meters, 23.8 meters, and 25.6 meters.
Track width4.1 meters.
By heightTwo options are available: 2.9 meters and 4.6 meters (height increasing type).
GradeabilityThe climbing ability corresponding to different cross body lengths is 38.2-18%, 44.2-16%, 50.1-15%, 56.1-12%, and 62.0-9%.
Nozzle spacing: 2.9 meters or 1.45 meters.