Beijing Debang Dawei Technology Co., Ltd
Home>Products>DEBONT JP-75/50 Roll up Disc Sprinkler Irrigation Machine
Product Groups
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
  • Address
    No.10 Ronghua South Road, Beijing Economic and Technological Development Zone, Ronghua International 3-1609
Contact Now
DEBONT JP-75/50 Roll up Disc Sprinkler Irrigation Machine
DEBONT JP-75/50 Roll up Disc Sprinkler Irrigation Machine
Product details
  • The JP series reel irrigation machine is mainly composed of a chassis, a reel, a PE pipe, a water turbine, a gearbox, a speed compensation device, and a nozzle truck. The key components are the water turbine, gearbox, and PE pipe.
    The working principle of the JP series reel irrigation machine is to place the main unit on one side of the irrigation plot; Use traction to pull out the water supply pipe wrapped around the host and the nozzle truck connected to the water supply pipe to the other end of the plot; Connect to the water source and reach a certain working water pressure. The sprinkler truck starts spraying water onto the farmland through a spray gun or cantilever; At the same time, the host utilizes the mechanical kinetic energy generated by the water pressure through the operation of the water turbine, gearbox, and transmission system to start rotating the reel.
    3. The rotation of the reel drives the water supply pipe to roll back from one end of the plot towards the direction of the main engine. This creates a situation where the reel rotates while the sprinkler truck travels back evenly at the set speed, spraying water as it moves until the entire plot is irrigated. When the sprinkler truck reaches the main unit position, the main unit can lift and fix it to the main unit. At this point, the entire irrigation process is complete, the water source is cut off, and the equipment can enter the next plot for another irrigation.
    4. The reel itself does not require additional power and relies on the water pressure entering the system to complete all tasks.
    5. A wide range of equipment selection from the 40 series to the 100 series.
    6. The most precise irrigation, lowest energy consumption, and high irrigation uniformity.
    7. The overall service life of the Pengjun machine is over 10 years, and the PE pipe has a service life of over 15 years.
    8. In terms of installation, it is easy to operate and safe to use.
    9. Efficient water conservation, with a water saving rate of over 75%, increasing crop yields.
    Within one irrigation cycle, the single machine control area of JP-75 can reach about 300 acres, and the single machine control area of JP-50 can reach about 130 acres.
    Spray gun type - with ultra long range and perfect irrigation uniformity, the spray gun irrigates various high and low stem crops in the simplest way possible.
    Cantilever type - low-pressure irrigation for delicate crops, without damaging soil and crops, with a controlled bandwidth of up to 34 meters.

  • JP-50 series reel sprinkler irrigation machine technical parameters:

    index

    project

    index

    JP-50-140

    JP-50-150

    JP-50-180

    JP-50-200

    External dimensions(lxbxhmm

    3100x1580x1500

    3100x1580x1500

    3100x1580x1500

    3100x1580x1500

    PEOuter diameter of the tube,mm

    50

    50

    50

    50

    PETube length,m

    125

    135

    165

    185

    tire/rim section

    7.00-9/5.00S

    7.00-9/5.00S

    7.00-9/5.00S

    7.00-9/5.00S

    Spray nozzle wheelbase,mm

    1420

    1420

    1420

    1420

    Single nozzle

    internet traffic

    m³/h

    5.5-19.7

    5.5-19.7

    5.5-19.7

    5.5-19.7

    Working pressure

    Mpa

    0.4-0.76

    0.4-0.76

    0.4-0.76

    0.4-0.76

    Nozzle Diameter

    mm

    9-16

    9-16

    9-16

    9-16

    Effective spraying width

    m

    31.5-51.2

    31.5-51.2

    31.5-51.2

    31.5-51.2

    Spray range

    m

    18.5-30

    18.5-30

    18.5-30

    18.5-30

    truss
    Nozzle

    Working pressure

    Mpa

    0.2-0.5

    Number of nozzlesxdiameter

    mm

    9x3.6-6.4

    internet traffic

    m³/h

    5-19

    Effective spraying width

    m

    18-26

    sprinkler range

    m

    3.0-4.0


    JP-75 series reel sprinkler irrigation machine technical parameters:

    project

    index

    JP-75-200

    JP-75-250

    JP-75-300

    External dimensions(lxbxhmm

    3050x1590x2410

    3490x1500-1800x2620

    3490x1500-1800x2620

    PEOuter diameter of the tube,mm

    75

    75

    75

    PETube length,m

    180

    230

    280

    Effective spraying length,m

    200

    250

    300

    Spray nozzle wheelbase,mm

    1800-2500

    Single nozzle

    internet traffic

    m³/h

    15-37

    Working pressure

    Mpa

    0.55-0.90

    Nozzle Diameter

    mm

    16-24

    Effective spraying width

    m

    47-74

    sprinkler intensity

    mm/h

    6the moon10sun

    Spray range

    m

    27-43

    truss
    Nozzle

    Working pressure

    Mpa

    0.4-0.7

    Number of nozzlesxdiameter

    mm

    13x4.4-7.5

    internet traffic

    m³/h

    11.4-38.3

    Effective spraying width

    m

    30-34

    sprinkler range

    m

    4.0-5.0

    Note: The external dimensions do not include the nozzle car and the adjustable wheelbase of the chassis


  • Online inquiry
    • Contacts
    • Company
    • Telephone
    • Email
    • WeChat
    • Verification Code
    • Message Content

    Successful operation!

    Successful operation!

    Successful operation!