The Yihai Counting Direct Reading Remote Water Meter is a self-developed direct reading remote water meter that is convenient for remote meter reading and control, designed to meet the needs of users in installation and maintenance. It places the remote direct reading module in a waterproof box and connects it to the water meter base through waterproof wires and snap on sensors. If the direct reading module malfunctions during use, there is no need to disassemble the water meter, just replace the direct reading module, saving time and effort. The remote direct reading water meter adoptsM-BUS/RS485Bus communication enables remote direct reading of water meter usage, effectively avoiding the need for management departments to conduct on-site meter reading. While saving manpower, material resources, and financial resources, it effectively improves productivity.

Counting direct reading remote water meter, compliant withGB/T778-2007Cold Water Meter andCJ/T224-2012Technical requirements for electronic remote water meter. Communication protocol complianceCJ/T188-2004Technical Conditions for Data Transmission of Household Measuring Instruments orDL/T645-1997The requirements of the "Multi functional Energy Meter Communication Protocol" can also be customized according to customer needs.

1、 Technical specifications of detachable direct reading module:

2、 Installation instructions for detachable direct reading module:

To prevent collision, compression or damage to the counting direct reading module during transportation, please install the water meter first and then install the counting direct reading module:

1After installing the water meter, place the counting direct reading module on the right side of the corresponding slot, and then rotate it counterclockwise to rotate the four claws of the sensor like a disk4The claw is located at the bottom, and after rotation, it moves downwards and clicks into the slot.

2Willow nail fixation: Insert the willow nail and finally clamp and fix it with pliers, and the assembly is complete.

Note:

1Before starting to use, the initial value of the direct reading module should be written (set to be consistent with the mechanical dial value of the water meter);

2The collected data needs to be multiplied by the magnification value, whereDN15—25For0.01；DN32—65For0.1；DN80The above is1(Based on actual circumstances);

3If there is no willow nail, other methods can be used to fix it tightly.