ZJHPF46Pneumatic thin film lined fluorine single seat regulating valveIntroduction:
ZJHPF46The pneumatic thin film lined fluorine single seat regulating valve is a PTFE bellows sealed valve. It consists of two parts: a pneumatic thin film actuator and a straight through single seat fluorine lined plastic valve. Due to the high-pressure injection molding process used for the part of the valve that comes into contact with the medium, it is lined with corrosion-resistant media (such as hydrochloric acid, sulfuric acid, nitric acid, hydrofluoric acid, etc.) and aging resistant polytetrafluoroethylene (abbreviated as PTFE)F46)The valve is widely used in industries such as chemical, petroleum, metallurgy, pharmaceuticals, and power for process control of highly corrosive media such as acids and alkalis, as well as toxic and volatile gas and liquid media, due to its use of polytetrafluoroethylene bellows for sealing
ZJHPF46Pneumatic thin film lined fluorine single seat regulating valveproduct overview:
ZJHPF46Pneumatic fluorine lined regulating valve and corrosion-resistant pneumatic regulating valve are a type of corrosion-resistant straight through single seat regulating valve. The inner wall of the valve body and the components inside the valve that come into contact with the fluid are both high-pressure injection molded, lined with corrosion-resistant and aging resistant perfluoroethylene propylene(F46)It is also sealed with polytetrafluoroethylene bellows.
ZJHPF46Pneumatic thin film lined fluorine single seat regulating valvecharacteristic:
1Corrosion resistance. It can withstand corrosion from almost all media, including concentrated nitric acid and aqua regia.
2Good sealing performance. Double sealing with corrugated pipe and packing ensures no leakage.
3The leakage is small. Due to the use of soft seals for the valve core and seat, no leakage is ensured.
4, equipped withHAExecution mechanism, with high output force and compact structure. The product complies withGB/T4213-92.
Applicable scenarios:
Pneumatic fluorine lined regulating valves are widely used for controlling highly corrosive media such as acids and alkalis, as well as toxic and volatile gases and liquids.
ZJHPF46Pneumatic thin film lined fluorine single seat regulating valveComponent parameters
components and parts | material | |||
Valve body and valve cover | ZG230-450lineF46 |
|
|
|
Valve seat, valve core | 304lineF46 |
|
|
|
valve stem | 304lineF46 |
|
|
|
Guide Sleeve | 304lineF46 |
|
|
|
corrugated tube | stainless steel+F46 |
|
|
|
ZJHPF46Pneumatic thin film lined fluorine single seat regulating valveTechnical Parameter
Nominal Diameter(DN) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 150 |
Valve seat diameter(dn) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 150 |
rated flow coefficient(KV) | 5.0 | 8 | 12 | 20 | 32 | 50 | 70 | 100 | 240 |
Allowable pressure difference(MPa) | 3.8 | 3.2 | 3.0 | 2.0 | 1.8 | 1.5 | 1.4 | 1.0 | 0.6 |
nominal pressure(MPa) | 1.6、2.5、4.0、6.4 | ||||||||
rated travel(mm) | 16 | 25 | 40 | 60 | |||||
Equipped with actuator model | ZHA/B-22 | ZHA/B-23 | ZHA/B-34 | ZHA/B45 | |||||
Valve core form | Single seat plunger type fluorine lined valve core | ||||||||
Traffic characteristics | Quick opening feature | ||||||||
Flange standard | GB/T9113、JB/T79、HG20594And other standards | ||||||||
Connection form | flange(FF RF RTJ) | ||||||||
Valve cover form | Standard type-40~+150℃Bellows type-40~+150℃ | ||||||||
Cover type | Bolt compression type | ||||||||
Packing | VType PTFE packing |
ZJHPF46Pneumatic thin film lined fluorine single seat regulating valvePneumatic thin film actuator parameters:
Configure actuator category | ZHA/BMulti spring membrane actuator | ||||
Model of actuator | ZHA/B-22 | ZHA/B-23 | ZHA/B-34 | ZHA/B-45 | ZHA/B-56 |
Effective area(cm2) | 350 | 350 | 560 | 900 | 1400 |
trip(mm) | 10、16 | 24 | 40 | 40、60 | 100 |
Spring range(KPa) | 20~100(Standard)20-60、60-100、40-200、80-240 | ||||
Membrane material | Nitrile rubber with nylon cloth, ethylene propylene rubber with nylon cloth | ||||
air supply pressure | 140~400KPa | ||||
air connection | RC1/4' | ||||
ambient temperature | -30~+70℃ | ||||
Can be equipped with accessories | Positioner, air filter pressure reducer, holding valve, travel switch, valve position transmitter, handwheel mechanism, etc | ||||
Action form | air-to-close(B)- Valve position open during gas loss(FO)Air opening type(K)- Valve position closed when gas loss occurs(FC) |
ZJHPF46Pneumatic thin film lined fluorine single seat regulating valveperformance parameter:
project | Without locator | Equipped with locator | ||
Basic error% | ±5.0 | ±1.0 | ||
return difference% | 3.0 | 1.0 | ||
dead zone% | 3.0 | 0.4 | ||
Always point deviation% | air to open | Starting point | ±2.5 | ±1.0 |
Starting point | ±5.0 | ±1.0 | ||
air to close | Starting point | ±5.0 | ±1.0 | |
End | ±2.5 | ±1.0 | ||
Rated travel deviation% | ≤2.5 | |||
Leakage amountL/h | 0.01%Rated capacity of valve | |||
Adjustable rangeR | 30:1 |
ZJHPF46Pneumatic thin film lined fluorine single seat regulating valveConnection size:
Nominal Diameter(DN) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | |
L | PN16/25 | 181 | 184 | 200 | 222 | 254 | 276 | 298 | 352 | 410 | 451 |
PN40 | 194 | 197 | 200 | 235 | 267 | 292 | 317 | 368 | 425 | 473 | |
H | PN16/25 | 52.5 | 57.5 | 75 | 75 | 85.5 | 92.5 | 100 | 110 | 142.5 | 158 |
PN40 | 52.5 | 57.5 | 75 | 75 | 82.5 | 92.5 | 100 | 117.5 | 150 | 167.5 | |
H1 | 132 | 132 | 158 | 170 | 179 | 214 | 221 | 234 | 270 | 294 | |
H2 | 298 | 298 | 298 | 298 | 298 | 380 | 380 | 380 | 510 | 510 | |
H3 | 180 | 180 | 180 | 180 | 180 | 236 | 236 | 236 | 310 | 310 | |
L1 | 289 | 289 | 289 | 289 | 289 | 347 | 347 | 347 | 476 | 476 | |
A | 282 | 282 | 282 | 282 | 282 | 360 | 360 | 360 | 470 | 470 | |
C | 220 | 220 | 220 | 220 | 220 | 270 | 270 | 270 | 320 |
320 |