1、 Product Introduction of Carbon Monoxide Sensor Detection Module

The BYC02-CO carbon monoxide sensor module adopts imported Japanese fundamental electrochemical gas sensor calibration output signals TTL and IIC, designed for low-cost application users of integrators. The experimental cabin is uniformly calibrated, and the data is stable and reliable.

2、 Application fields of carbon monoxide sensor detection module

This product is widely used in hotels, exhibition halls, hospitals, shopping malls, restaurants, airports, train stations, entertainment halls, cinemas and other public places;

Places such as homes, villas, office buildings, conference rooms, classrooms, etc;

Various industrial applications such as factories, workshops, greenhouses, and clean rooms;

Research institutions, portable/handheld detectors, fixed gas transmitters, atmospheric environment detectors, industrial toxic and harmful gas transmitters, etc.

3、 Carbon monoxide gas

Carbon monoxide (CO) is a product of incomplete combustion of carbon containing substances such as coal and petroleum. It is a colorless, odorless, and non irritating toxic gas that is almost insoluble in water and difficult to react chemically with other substances in the air. Therefore, it can remain in the atmosphere for 2-3 years. If there is severe local pollution, it poses a certain risk to the health of the population.

4、 Technical parameters of carbon monoxide sensor detection module

Technical Parameter	BYC02-CO
Detect gas	Carbon monoxide (CO)
Detection Principle	Principle of Electrochemical Detection
measuring range	0-500ppm
resolution	1ppm
accuracy	±5%F.S
Sensor lifespan	More than 3 years of service life
Warm-up time	＜180S
sampling interval	3S
Response time (T90)	＜30S
Nonlinear	±2%
repeatability	±2%
Supply Voltage	DC 5V or 3.3V
power consumption	﹤65 mW
signal output	TTL and IIC
work environment	-20～50℃； 0-95% RH (no condensation)
Environment	-40～60℃； 0-100% RH (no condensation)
Weight/Size	32mm (length) x 25mm (width) x 16.7mm (height), with needle arrangement, needle arrangement specification is 2.54 x 7pin
Fixed hole spacing	17.7mm × 17.7mm × Φ 3.5 diagonal two through holes (see attached figure)
notes

6、 Pin definition of carbon monoxide sensor detection module