Program features:

1. Worry free after-sales service: The school does not have to worry about machine malfunctions and after-sales issues. The supplier will come to the school for free to solve problems within 24 hours by phone

2. The water quality assurance machine adopts deep purification reverse osmosis filtration, and the effluent can be directly consumed, while also providing hot and cold drinking water at the same time.
3. In line with the school's philosophy of health, safety, and peace of mind.

Design features

(1) Due to the necessity of laying pipelines, this method is generally applicable to newly constructed or renovated buildings;

(2) It is necessary to reserve and construct an independent computer room for installing a complete set of direct drinking water treatment equipment, and the decoration should meet the special decoration standards. The area is generally 20-60 square meters (depending on the project scale), and the location is usually in the basement;
(3) Due to the fact that the pipelines used are generally within ￠ 75, they are smaller compared to fire and drainage pipes. Therefore, the pre embedding construction of pipelines can be carried out after the completion of these pipeline constructions, but must be done before interior decoration;

(4) The design of the pipeline network is different from that of general domestic water pipes. The entire pipeline network must be a closed circulation system, and must achieve the same flow and pressure to ensure the proper circulation of water in the pipeline network and ensure fresh water quality;

Terminal point water supply (i.e. decentralized water supply) - low-carbon, environmentally friendly, energy-saving, and flexible direct drinking water
1、 Separate water production equipment and drinking equipment - that is, install a set of water production equipment in each building and transport it to each water point in the building through pipelines. This type of equipment can be placed on rooftops or under stairs.

2、 The equipment for water production, heating, and drinking is integrated into one. This device is generally installed in the centralized drinking water room on each floor, with an integrated water production and heating section, and is supplied with both normal water and set temperature hot water.