1Calcium chloride rake dryerType of

The vacuum rake dryer is generally equipped with a condenser, solvent receiving tank, vacuum pump, control cabinet, etc. Hot water, thermal oil, steam and other heating methods can be selected according to the process conditions. It can also be combined with concentration equipment and other devices for special purposes. Please consult the Technical Department of Changzhou LiLi Drying Equipment Co., Ltd. for equipment configuration.

1. Basic vacuum rake dryer: equipped with all the features of dynamic vacuum drying equipment, stirring materials during solvent evaporation process. According to the characteristics of the material, four tapping rods can be inserted into the end cover mirror hole to enhance the crushing and dispersing function of the material.

2. Axial heating vacuum rake dryer: equipped with all the features of dynamic vacuum drying equipment, stirring materials during solvent evaporation process. According to the characteristics of the material, four tapping rods can be inserted into the end cover mirror hole to enhance the crushing and dispersing function of the material. The heat exchange area has increased by about 30% compared to the basic type.

3. Vacuum Paddle Drying Machine: It is a single axis vacuum drying equipment that adds hollow core blades to the mixing shaft to further expand the heat exchange area between the walls. The blades are equipped with screw belts to scrape the material near the tank wall and are also one of the main sources of driving force for material discharge. Suitable for high humidity, loose materials after drying.

Vacuum ribbon dryer: This model combines the characteristics of a horizontal double ribbon mixer, with inner and outer layers of ribbons distributed on the mixing shaft, and two layers of ribbons rotating in opposite directions. This model enhances the shear mixing ability of the equipment on the basis of the basic vacuum rake dryer.

IICalcium chloride rake dryermaterial characteristics

Calcium chloride is a chemical substance composed of chlorine and calcium elements, with the chemical formula CaCl2 and a slight bitterness. It is a typical ionic halide, appearing as white, hard fragments or particles at room temperature. Its common applications include saltwater used in refrigeration equipment, road deicing agents, and desiccants

IIICalcium chloride rake dryerworking principle:

The dried material is added from the feeding port above the shell, and under the stirring of the constantly rotating rake teeth, the surface of the material constantly updates when it comes into contact with the shell wall. The dried material is heated by steam (or hot water, thermal oil) between the walls, causing the moisture inside the material to vaporize. The vaporized moisture is promptly removed by a vacuum pump.

Due to the high vacuum degree during operation, the boiling point of the solvent is significantly reduced, and the surface water vapor pressure of the dried material is much higher than the water vapor pressure inside the dryer shell. This is beneficial for the discharge of internal and surface moisture in the material.

After completing the homework, close the vacuum valve, break the vacuum, open the vacuum discharge valve at the bottom of the equipment, and discharge the material.

IIICalcium chloride rake dryerStructure:

The tank body of the vacuum rake dryer is cylindrical, and the vacuum rake dryer is composed of a vacuum tank body, a mixing shaft, an end cover, a bracket, a motor, a reducer, a control cabinet, etc.

Vacuum tank: It is a jacket wall heat transfer type, and its upper part is equipped with a vacuum filtration interface (connected to a mixed heat stainless steel sintering vacuum filter), a material inlet (used for vacuum feeding of liquid materials), a manhole (used for equipment maintenance and solid material input), a heat medium inlet and outlet, a temperature gauge pipe mouth, a pressure gauge pipe mouth, etc.

Mixing shaft: There are two types of mixing shafts: conventional (non heating) and hollow core. The hollow core mixing shaft is equipped with a sleeve inside for the entry and exit of heat medium in the shaft and rake arm. The rake arm is welded to the mixing shaft, and there is a rake plate (also known as a scraper plate) with an inclination angle above the rake arm. The rake plate near the cylinder cleans the material attached to the cylinder wall during rotation, continuously updating the heat transfer surface of the partition wall, which is conducive to material mixing and heat conduction.

Rotary seal: The rotary seal between the shaft and the end cover can be equipped with packing seal, mechanical seal and other types according to material and process requirements.

End cover: equipped with a mirror, rotating seal, bearing seat, etc. In addition to observing the internal condition, the mirror can also choose to insert or remove a striking rod from the mirror mouth according to the characteristics of the material.

The rack is a component that sets up the transmission device of the vacuum rake dryer, usually made of channel steel or thick walled square tube.

Manhole: Generally, a quick opening press vacuum manhole is used for solid material input and internal equipment maintenance. For equipment that may undergo positive pressure operation, standard vacuum manholes should be selected.

Vacuum filter; The general configuration is a mixed heat stainless steel sintered vacuum filter, with heat tracing and insulation on the outside of the filter housing to prevent the condensation and reflux of evaporated solvents. The filter material is a stainless steel sintered filter or a filter made of multi-layer stainless steel sintered plates, which can be disassembled and cleaned for easy cleaning. Due to the fact that most materials only exhibit peak dust carrying waves after the evaporation of most solvents, the use of pulse blowback has little effect on solvent recovery. Therefore, vacuum filters are often equipped with compressed air or nitrogen pulse blowback for online dust cleaning based on material characteristics and process requirements. In process design and equipment procurement, the functional properties of vacuum filters can be selected based on material characteristics and process requirements.

Vacuum discharge valve: composed of a valve seat, sealing gasket, valve plate, lifting cylinder (or manual screw), and locking bolt. The lifting cylinder is powered by compressed air and equipped with a self-locking control valve, which can automatically lock the open or closed state to prevent valve opening or closing failure due to sudden failure of compressed air supply. For the vacuum rake dryer used in large-scale combination devices, in order to facilitate the connection of materials through screw, vacuum suction and other methods, the vacuum discharge valve is often used in a self controlled combination.

Transmission mechanism: composed of a motor and a reducer, the reducer is directly connected to the mixing shaft through a coupling, and the reducer and motor are driven by a belt, which can avoid damage to the mixing shaft or seal when unforeseen debris enters the tank and causes blockage between the mixing blade and the tank without being detected. To ensure the continuous effectiveness of the rotary seal, variable frequency speed regulation is generally used for the transmission motor.

4Calcium chloride rake dryerDelivery site