CW6180/61100 series-Global supplier

200 meters north of the intersection of Zhonghua Road and Renmin Avenue in Beiguan District, Anyang City, west of the road

CW6180/CW61100 This seriesHorizontal lathe is suitable for processing large and medium-sized parts of castings, steel parts, and non-ferrous metals.Can complete various taskscentreThe inner and outer cylindrical surfaces, conical surfacesEnd face, groove cutting, drilling, boring and nestingCutting and tapping processes, and capable of turning metric, imperial, modular, and radial jointsAnd taper threadsWaiting for various internal and external threads；The upper tool holder can be used alone to shorten the conical surface, and the upper tool holder can also be used in conjunction with longitudinal feed to turn long conical surfaces. The machine tool has high power, strong rigidity, and a wide speed range, allowing for high-speed operationperhapsStrong cutting.

Project Item	unit	CW6180	CW61100
Processing range Capacity
Swing over bed	mm	800	1000
skateboardMaximum Rotationdiameter	mm	480	680
maximum length of workpiece	mm	1500 2000 3000 4000 5000 6000
Maximum cutting length	mm	1350 1850 2850 3850 4850 5850
Bed rail width	mm	600
Spindle
Spindle end code	mm	C11 (C15 is a special configuration)
spindle bore	mm	100 (140 is a special configuration)
Front end taper hole of spindle		01:20
Range of spindle speed	r/min	Forward rotation: 6-750 Reverse: 10-775
Number of spindle speeds		18/6 types
Feed motion
Range of longitudinal and transverse feed rates		64；0.1-24.32
Horizontal and vertical feed ratio		1/2
Screw pitch	mm	12
Range of metric thread types		50 types; one-240
Range of thread types in imperial system		26 types; fourteen-1
Range of types of modular threads		53 types; zero point five-120
Range of types of radial threads		24 types; twenty-eight-1
Sliding board fast moving speed	mm/min	4000
Tool Post
Vertical distance from spindle center to tool installation base	mm	33
Rotation angle of knife holder	°	±90°
Maximum lateral travel of the lower knife holder	mm	500
Maximum travel of upper knife holder	mm	200
Knife bar cross-section	mm	32 (tool holder size 202x202)
Tailstock
Diameter of tailstock sleeve	mm	100
Tail socket travel	mm	250
Tail socket taper hole		morse6
Other Others
Main motor power	kw	11
Machine tool length	mm	3670 3985 5165 6220 7400 8260
Machine width	mm	1730
Machine height	mm	1450