1. The gantry structure of the rack has good system rigidity and high transmission accuracy.
2. Bilateral drive, running smoothly.
3. The flame/plasma dual-purpose CNC cutting system is easy to operate.
4. Fully automatic graphic programming software, simple nesting.
5. Standard configuration includes flame and plasma cutting functions;
6. Optional multiple flame/plasma cutting torches for simultaneous cutting, improving efficiency
7. Flame and plasma cutting can be configured with automatic capacitor or arc voltage adjustment, making it convenient to use and operate;
8. The crossbeam adopts a gantry style steel structure, with double-sided drive and high stability;
9. The horizontal guide rail adopts domestic or imported linear guide rail, with high precision and good guidance. The longitudinal guide rail adopts special steel rails, which have been ground on the surface and have high mechanical accuracy and wear resistance.
10. The drive rack and gear are customized by professional manufacturers, with surface carburizing and quenching, and high precision. The horizontal and vertical transmission adopts the German NEUGRART high-precision, high torque, low backlash, maintenance free planetary gear reducer.

·The system upgrade adopts the USB upgrade method, which is convenient, simple, practical, and provides lifelong upgrade services;

·Parameter backup and parameter restoration;

·Supports four modes: oxygen gas, plasma, powder coating, and demonstration;

·Separate control of oxygen gas and plasma IO;

·Oxygen gas automatic high adjustment, two-stage preheating, three-stage perforation;

·Plasma arc voltage feedback, positioning feedback, automatic turn off arc voltage adjustment;

·Support edge cutting, which can reduce preheating time for thicker steel plates;

·According to the thickness of the steel plate, automatic speed limit can be set at the corner to effectively prevent overburning;

·Manually select the starting line or choose the perforation point;

·Display of dynamic/static machining graphics, zooming in/out of graphics, dynamically tracking cutting points in the zoomed in state;

·Equipped with power-off and breakpoint protection memory function;

·The "offset cutting" function can avoid the waste of boards caused by incorrect discharge calculation;

·Different management permissions and corresponding passwords can be set to protect the rights and interests of equipment manufacturers;

·Remote control that supports P2P mode or BCD (8421) and serial RS232 mode;

·Support laser point-to-point function;

·Support plasma dynamic perforation function;

·Statistics on processing piece rate, running time, perforation frequency, and other related information.

Junke CNC Military Quality