control axis

number of controlled axes

3axis, 2-axis (specified by the user at the time of ordering)

Number of linkage axes

3axis, 2-axis

Input command

Minimum setting unit

X：0.001mm Z：0.001mmA：0.001mm

Minimum moving unit

0.001mm

Maximum instruction value

±99999.999mm

feed

Maximum moving speed

60000mm/min

Thread lead

0.0001mm～500.000mm

Automatic acceleration and deceleration

Straight line, front acceleration and deceleration

Feed rate multiplier

0～150%

Fast speed multiplier

Fo~100%, Fo is set by parameters

manual

Manual continuous feed

X,Y,Z,A； Manual feed speed button setting

Return to the zero point of the machine tool

Three types of zeroing: Mode B (Z-pulse interruption mode), Mode C (zeroing positioning switch), Mode A (floating zero point)

Return to program zero point

Quick rework starting point

Single step incremental feed

Feed equivalent 0.001mm, 0.01mm, 0.1mm, 1mm

Handwheel feed

Magnification: x1, x10, x100; Axis selection: X, Z, Y; Press buttons or external input ports to control magnification and axis selection

imputation

location,Interpolation function

straight line、circular arcThread cycle, tapping cycle, drilling cycle, outer circle, end face composite cycleand other functions

Storage and Editing

programstoragecapacity

large capacity，2Mbyte

Storage programanumber

480 of them

program editing

Insert, modify, delete, copy

parameter storage

Parameter recovery, backup, factory reset, parameter USB import and export

display

LCD (Liquid Crystal Display)

8.4 inches，TFT True Color Display

Location, program, tool repair, alarm, diagnosis, parameters, settings, USB flash drive

Rich and intuitive display content

USB function

Program import and export

have

Parameter import and export

have

System USB upgrade

have

M. S, T function

input port

32Road switch quantity (NPN)，Optoelectronic isolation input

Output port

32Road switch quantity(NPN)

Spindle function

Inverter analog control or S1-S4 gear control; The output magnification of the spindle analog quantity can be adjusted from 0 to 150%;

Tool function

Knife position number: T01~T08, knife repair number: 01~16; Electric knife holder, row knife holder or dedicated knife holder; Adjust the value of the blade during operation; Program controlled dynamic tool compensation.

Auxiliary T function

Yes, specific T code executes specific subroutines

Auxiliary M function

Yes, specific M code executes specific subroutines

MDI method

Quick MDI method

Directly enter the program segment to be executed in the location interface (absolute or relative coordinates), and it is recommended that users use this mode.

Traditional MDI input method

Enter the MDI input interface and input by field

Compensation function

Compensation function

Tool compensation, reversegap compensationLead screwPitch error compensation

Fixed cycle function

G90

Outer circle, inner circle turning cycle (cylindrical surface, conical surface)

G94

End face turning cycle (flat, conical)

G75

Cutting grooves or cutting cycles

G74

End face drilling cycle

G73

Closed cutting cycle

G72

End face rough car cycle

G71

Outer/inner circle coarse car cycle

G70

Precision machining cycle

G77

End face deep hole machining cycle

Thread function

G92

Thread cycle (straight, tapered threads, metric, imperial, single head, multi head threads, arbitrary thread cutting angle)

G79/G78/G69

Dual axis interpolation tapping

G76

Thread Composite Cycle

G32

Single blade thread function

,,

G33

Rigid tapping cycle

G34

Variable pitch thread function

G35

End face thread function

Chamfering function

G01 I/K/R

45 degree angle or circular arc angle

Signal jump function

G31

Signal jump encountered during feed operation

Smooth transition of segments

G61，G64

Program segment automatic speed transition function, with automatic dynamic adjustment of transition curve

Infinite and finite loop function

M92

Perform infinite or finite loop processing on programs or partial program segments

Program conditional jump function

M91

Based on external condition signals, jump to different instruction flows of the program for execution.

Extended output port control

M20,M21,M22

Extended output port level output mode or pulse output mode control

External condition waiting function

M01

Waiting for effective external signal input, timeout alarm

Output automatic repetitive control function

M35

Suitable for automatic loading and unloading function, detecting the loading status, and repeating continuous loading

Rotation axis control

M26,M27,M28

Set the rotation speed and direction for quick positioning and indexing after rotation stops

Other functions

Chuck function

Internal card, external card, foot switch input and button operation

Lubrication function

Continuous lubrication, intermittent lubrication

timer function

Start up processing timing

Piece rate function

Single start-up piece rate and cumulative processing piece rate

Three position switch function

have

Function of running, pausing, and alarm status indicator lights

have

External switch signal starts and pauses program operation

have

Diagnostic display

Input port status

have

Output port status display and control

Yes, the output port can be controlled on and off in the diagnostic interface

Axial arterial pulse count

have

Number of spindle encoder wires

have

Spindle analog voltage

have

Input port wiring and port definition

have

Output port wiring and port definition

have

Safety function

Positive and negative direction hardware limit

have

Positive and negative direction software limit

have

Emergency stop

have

User defined alarm

Yes, two custom alarm inputs

Debugging function

single-section operation

Machine tool lock function

Handwheel trial operation function

have

Advanced features

Handwheel trial operation and debugging function

Yes, the automatic running speed is controlled by shaking the handwheel to verify the program

User macro program

Yes, B-class macro program

Driver interface

AC servo or three-phase hybrid drive

Control mode -“direction+pulse”

Control mode 2: "Dual pulse mode"