Our factory produces fiberglass desulfurization and dust collectors, with commonly used specifications including 1-ton boiler desulfurization and dust collectors, 2-ton boiler desulfurization and dust collectors, 4-ton boiler desulfurization and dust collectors, 6-ton boiler desulfurization and dust collectors, 8-ton boiler desulfurization and dust collectors, 10 ton boiler flue gas desulfurization and dust collectors, 15 ton boiler flue gas desulfurization and dust collectors, 20 ton boiler flue gas desulfurization and dust collectors, 25 ton boiler flue gas desulfurization and dust collectors, 30 ton boiler flue gas desulfurization and dust collectors, and desulfurization and dust collectors weighing over 35 tons. Spray desulfurization tower, water film desulfurization and dust collector, desulfurization and dust removal alkali washing tower, cyclone plate desulfurization and dust collector, alkali washing desulfurization tower, boiler dust collector Process principle: FRP wet desulfurization and dust remover uses a wet desulfurization and dust removal technology developed based on the mechanism of multiphase turbulent mass transfer, combines centrifugal water film dust removal and spray boiling desulfurization and dust removal, accelerates the flue gas with dust and harmful gas through Venturi and a special cyclone, and collides with the atomized liquid sprayed in front of Venturi and the desulfurization liquid sprayed at the upper end of the tower to form a rotary shear force. Gas and liquid are peeled at high speed, fully mixed, and then rise into the boiling reaction layer. Dust and harmful gas in the flue gas are captured and absorbed by the fine liquid particles in the desulfurization liquid. As the atomized liquid particles produce a large number of interfaces, the unit liquid volume is captured and absorbed High efficiency of smoke and harmful gases. The purified flue gas is discharged into the atmosphere through a dehydrator, induced draft fan, and chimney. The technical indicators of the process include desulfurization efficiency (%) ≥ 85 dust removal efficiency (%) ≥ 98 Ringman blackness (grade) ≤ 1 liquid to gas ratio (L/m3) 0.8-1.5 system resistance (Pa) ＜ 1000. The technical characteristics of desulfurization and dust removal are integrated, compact structure, small equipment footprint, and low investment cost; Desulfurizers can be used as soda ash calcium oxide, slag flushing water magnesium oxide, slag flushing water lime, or other alkaline wastewater; The system is easy to operate, stable to run, and easy to maintain; Corrosion resistance Strong adaptability, suitable for various types of boilers and kilns of large, medium, and small sizes, as well as for silicon iron furnaces, silicon calcium furnaces, and other furnaces with high smoke concentration, sawdust fuel boilers, straw fuel boilers, wood fuel boilers, heavy oil fuel boiler flue gas, waste plastic fuel boiler flue gas, and other difficult to treat flue gas. The wet flue gas desulfurization and dust removal system is suitable for coal-fired boilers in various industries, as well as for the transformation of existing granite water film dust collectors or the construction of new granite water film dust collectors or other material tower bodies for flue gas desulfurization and dust removal.