The programmable glue baking machine is a high-performance glue baking equipment with functions such as vacuum adsorption, top needle positioning glue baking, linear heating, etc. It can store 100 sets of programs, and each set of programs can have multiple steps. All operating parameters such as heating time and selection of lifting height can be conveniently set on the touch screen.

Professional production and sales of top needle heating table, spin coating machine (4 inches), spin coating machine (6 inches), spin coating machine (8 inches), high temperature heating table, small heating table, flowing atmosphere heating table, vacuum heating table, top needle heating table, precision heating table (350 ℃), precision heating table (400 ℃), 700 degree, 850 degree high temperature heating table. Support customization of various sizes of heating tables

Technical parameters:

1. Heating panel size: 220-220mm

2. Power input: 220V 1000W

3. Temperature control range: Room temperature -300 ℃; Temperature resolution: 0.1 ℃

4. Temperature resolution: 0.1 ℃

5. Temperature uniformity: ± 1% ℃

6. Can store 6 sets of program formulas, with 30 heating stages per set of formulas.

7. Electric ejector pin height adjustment: 0-30mm

8. Built in vacuum pump, equipped with vacuum adsorption function and four sets of limit switches.

9. Dimensions: Length, Width, and Height, 40X30X30 cm

Voltage: 220V Current 50Hz-60Hz

Heating area: 220 * 220 (mm)

Effective constant temperature range: 200 * 200 (mm)

Temperature control range: Room temperature -200 ℃/Room temperature -300 ℃ (optional)

Temperature resolution: 0.1 ℃

Temperature uniformity: ±% 1 ℃ (in a closed state without airflow disturbance)

Top pin height: 30mm (can be set in multiple heights)

Time setting: 1s-3000s

Power: 2000W (9A)/2500W (9A) (optional)

Inner height of cover: 38mm

Vacuum interface: The outer diameter of the outlet on the back plate of the equipment is 6mm

Vacuum input requirement: -0.04~-0.09Mpa

Linear heating: 1-15 ℃/min, adjustable heating rate

Host product size: 300 * 400 * 350 (mm)/485 * 389 * 305 (mm) (optional)

Product features:

1. Hard anodized aluminum corrosion-resistant heating panel.

2.7-inch full-color touch screen, advanced PLC control. Realize automatic lifting and lowering within a specified time, and can pick up pieces at regular intervals.

3. The height of the ejector pin can be set arbitrarily to achieve contactless glue baking.

4. Equipped with a built-in microcrystalline glass cover for insulation and dust prevention.

4.7-inch full-color touch screen control, advanced PLC control, automatic lifting and lowering within specified time, can be timed to pick up pieces, and the operation is more convenient

4. Anodized aluminum corrosion-resistant heating panel

4. Supports 4/6/8/12 inch silicon wafers

4. Temperature accuracy ± 1 ℃ (in a closed state without airflow disturbance)

4. Set the needle height arbitrarily to achieve contactless heating

4. Temperature resolution 0.1 ℃

4. Adopting a heating control integrated design, equipped with an anti leakage switch, safe and reliable

4. Design over temperature protection function to ensure safety during use

4. Intelligent control system, which can be divided into 30 program segments for temperature control

4. Equipped with vacuum adsorption function

The working principle and scope of application of the top needle heating table

The top needle heating table is a device that uses electric current to heat, and its main components are the heating plate and the top needle. The heating plate is made of thermally conductive material, which can quickly convert electrical energy into thermal energy and transfer the thermal energy to the top pin. A top pin is a tool used to heat and solder electronic components. It is usually made of thermally conductive materials and has good thermal conductivity and high temperature resistance.

When the top pin contacts the electronic component that needs to be heated, the heating plate will quickly transfer heat energy to the top pin, causing the surface temperature of the top pin to rise, thus achieving the purpose of welding. During the heating process, the top needle heating table also controls the temperature of the top needle by adjusting the current and heating time to ensure welding quality and work efficiency.

Scope of application of top needle heating table

The top needle heating table is mainly used for the maintenance and production process of electronic equipment. It can be used to solder various electronic components such as capacitors, inductors, diodes, transistors, etc. At the same time, it can also be used for processes such as pyrolysis, heat shrinkage, and thermoforming, and is widely used in industries such as electronics, communications, computers, and home appliances.

The top needle heating table has the characteristics of uniform heating, high temperature control accuracy, easy operation, safety and reliability, which can improve work efficiency and welding quality, and has been widely recognized and applied.

In short, the top needle heating table is an important tool for electronic equipment maintenance and production, with a wide range of applications and excellent performance. Through the introduction of this article, I believe readers have gained a deeper understanding of its working principle and application scenarios.

Our main products include CNC heating tables, constant temperature lifting function heating tables, lifting heating tables, flowing atmosphere heating tables, high-temperature precision constant temperature heating tables and other laboratory instruments and equipment. The company has a high-quality scientific research and technology team and advanced production equipment