Working principle:

Utilizing the compressibility of gases to buffer pressure fluctuations and partially supply water in the system.

Structure:

It mainly consists of a tank body, flange, airbag, needle valve, and pre filled nitrogen gas between the tank body and airbag

Network optimization materials: BQCRapid heat exchanger

　　heat exchangerThe vibration is mainly caused by the fluid flow on the shell side. Due to vibration, the fluid flow on the tube side is relatively small, and the vibration causes leakage and severe damage to the tube, resulting in a large amount of noise and an increase in pressure drop on the shell side of the heat exchanger. With the increase of heat exchanger capacity, the number of vibrations and damages continues to increase, which has attracted attention from the industry. Heat RecoveryHeat exchange unit

There are several types of damage caused by vibration: the heat transfer tubes of the heat exchanger are damaged due to surface collision and surface wear caused by vibration collision; The adjacent heat pipes of the heat exchanger are damaged due to collision; Reduce the lifespan of heat transfer tubes through vibration. There are small cracks in the pipeline fittings, which will ultimately damage the heat exchanger pipes.

characteristic:

1. One inflation can maintain long-term use

2. The tank is a sealed device that prevents contact between air and water, ensuring that the water quality is not contaminated by external factors;

3. Small footprint, fast installation, low investment, and convenient operation and maintenance;

4. Can replace high-level water tanks and towers used for fire protection, heating, and air conditioning in daily life, which is beneficial for building aesthetics and structural earthquake resistance;

5. Reduce the cost of construction;

6. Can automatically eliminate water hammer and noise in the pipeline network;

7. Plays the role of an expansion tank and automatic water replenishment in hot water, heating, and air conditioning systems

Technical parameters:

1. Maximum working pressure: 1.6MPa

2. Working temperature: 10-99 ℃

3. Pre charge pressure: 0.2MPa