BD Flow Cytometer General Agent

FirstlyThe C6 flow cytometer system is designed to be compact and convenient (17.3 inches wide x 16.3 inches deep), and can be equipped in any laboratory. Weighing less than 30 pounds, it is easy to move, which cannot be achieved by other similar products.
The C6 flow cytometer can avoid a common mistake for novice operators - adjusting voltage and synchronizing different cells. The C6 flow cytometer uses a low-pressure flow system (peristaltic pump) instead of a vacuum pump, so it can accurately control the sample injection speed and the diameter of the active flow zone, which can select the appropriate size of the active flow zone for the sample.

BD Flow Cytometer General AgentThe C6 detector not only sensitively captures pre scattered light and side scattered light, but also has four adjustable optical filters for fluorescence detection. It can collect data from 16 million channels in real-time, and the wide dynamic range eliminates the need for compensation for detectors. When using the Zoom function mode of Cflow software to observe a specific channel, other data is still monitored and recorded in the data file.The C6 flow cytometer system is designed to be compact and convenient (17.3 inches wide x 16.3 inches deep), and can be equipped in any laboratory. Weighing less than 30 pounds, it is easy to move, which cannot be achieved by other similar products.
C6 has no special requirements for power supply (110V-240V, 50-60HZ) and does not require any additional power control equipment.
If there are a large number of samples, an automatic sampling device can be optionally selected.

The Cflow operation analysis system can easily and quickly collect and analyze data, with excellent human-machine interface. After half an hour of training, researchers can flexibly and accurately use the C6 flow cytometer system.
Easy installation and maintenance. The system has an automatic decontamination and cleaning flow path program. When the host is turned off, the automation system will automatically clean the flow system with cleaning solution and then fill it with sheath solution. The sheath fluid will remain in the flow system until the next power on. During use, if you need to initiate the cleaning process, just click the mouse.
Due to the fact that the C6 flow cytometer does not use a pressurized flow system, it can accommodate various types of tubes, including any brand of 12 × 75mm tubes and miniature centrifuge tubes (uncovered).

Technical Parameter