BD-8818-BRElectric water coolingmixing mill/PLC programmable type/6inch

This experimental open mill is suitable for mixing and dispersing polymers such as rubber engineering plastic raw materials, pigment masterbatch granules, etc. The machine has dual roller mirror chrome plating and uses electric heating special molds. The surface temperature of the rollers is uniform, and the gap between the rollers can be adjusted with a three-dimensional safety protection device. It is safe, reliable, advanced and practical.

1.Temperature range: normal temperature~300℃

2.control manufacture Tool:PLCProgrammable color touch screen display, capable of setting and displaying process parameters such as roller temperature, spacing, and rotation speed

3.Temperature accuracy:±2℃

4.Heating method: electric heating tube

5.Cooling method: Water cooling (customer provided water source interface)

6.Heating time: at room temperature~200℃About need30min

7.turn number Compared to:1:1.4

8.Roller size:150× L320mm（6Inch)

9.Roller spacing:0.1～6mmadjustable

10.Roller speed:0-33r/minAdjustable (speed from)PLCControl and regulation

11.Roller surface:HRC55～60 high hardnessMirror chrome plating

12.Roller material: High carbon steel solid material (using high-temperature quenching treatment, drilling technique, etc.)

13.Transmission device: heavy-duty hinge transmission, hard faced gear.

14.total merit Rate:about10KW

15.Security protection: Pull rod emergency stop, knee top reversal and other security devices

16.body Accumulate:about1220600×1550 (W×D×H)mm

17.electricity Source:3∮，AC380V，25AThree phase five wire (customer provided power connection port)

18.heavy Quantity: Approximately650kg