Automatic rolling shutter machineMain features:
The automatic rolling shutter machine is an electromagnetic brake rolling shutter machine, which fills the gap in the rolling shutter machine market and has obtained a national patent. It has achieved noise free, safer, and more flexible and convenient operation. The unique brake buffer extends the service life of the rolling shutter machine.
The unique separation device can easily roll and place straw curtains in any situation. Unique overload protection device, very safe to use. The new generation of fixed roller shutter machines is designed with dual brakes, eliminating brake hazards. The innovative design of the fast and slow speed combination makes it easy to use and adjust the speed freely, enabling the fixed roller shutter machine to truly achieve the goal of safety and practicality.
　　Agricultural greenhouse roller shutter machinematters needing attention:
1. After each shutdown of the greenhouse roller shutter machine, cut off the main power supply outside the greenhouse in emergency situations.
Before using the greenhouse roller shutter machine for the first time, inject 3-4 kilograms of engine oil into the machine body, and replace it once a year thereafter.
After installing the rolling shutter machine, a thin film must be attached to the straw cover.
During the installation or use of the greenhouse roller shutter machine, it is necessary to regularly check whether the screws at the main unit and various connections are loose, and whether there are any problems such as breakage or open welding at the welding points.
5. Users are not allowed to disassemble the casing, nameplate, clutch system, etc. of the greenhouse roller shutter machine on their own, otherwise no warranty or replacement will be provided.
Before and during use, the clutch system of the greenhouse roller shutter machine must be oiled.
7. After the rolling shutter machine is started, an adult must be present next to the power switch. No one is allowed in front of the shed or near the vertical pole or rolling straw.
8. Near the control switch of the greenhouse roller shutter machine, another knife switch must be connected.
When it is lowered to the bottom or rolled up to 30 centimeters from the top of the shed, the machine must be stopped.
Before using the greenhouse roller shutter machine for the first time, the operator must undergo training.
11. When purchasing and installing on their own, users need to test the length of the shed and the weight of the straw, select appropriate materials, and use good welding techniques.
If the greenhouse roller shutter machine deviates slightly during the rolling process, it is a normal phenomenon. It can be adjusted every two months or so.