Installation and adjustment of atomic absorption high-efficiency atomizer (applicable to Jiangsu Tianrui):

1. If the inner diameter of the atomizer seat can pass through the atomizer with the impact ball cap, the end of the fog chamber can be directly inserted into the metal sheathed glass high-efficiency atomizer that has been adjusted to a better spray state without taking off the end of the fog chamber.

2. If the atomizer seat cannot pass through the atomizer with the impact ball cap, take down the end of the fog chamber, insert the metal sheathed glass high-efficiency atomizer with the impact ball cap removed into the atomizer seat and fix it, put on the impact ball cap, adjust it to a better spray state according to the following method, then reinstall the end of the fog chamber onto the fog chamber and fasten it.

3. Adjustment of spray state: suck and spray water (the lifting amount shall be more than 4ml/min), push the impact ball cap against the nozzle and rotate it back and forth, and observe the state of the sprayed air flow with fog.

The optimal state is:

1) Spray forward, symmetrical on all sides, with a large angle;

2) Spread out in a flat plane, symmetrical on all sides, and after adjustment, the connecting rod of the impact ball cap should be within a downward ± 45 degree angle.