VIP member
Aluminum foil and copper foil roll to roll electric motion sickness machine
Product Introduction: It consists of a winding unit, a corona unit, an ozone reduction unit, a correction tension unit, and a control unit.
Product details
Basic principle of aluminum foil and copper foil roll to roll electric motion sickness machine:
This device continuously corona discharges the front and back sides of the foil material to improve the surface wettability of the foil and increase its dyne value, preparing for the next process
Aluminum foil and copper foil roll to roll electric motion sickness equipment process:
Basic indicators of electric motion sickness for aluminum foil and copper foil rolls:
|
productivity |
≥100m/min |
Mechanical speed ≥ 120m/min |
|
Pass rate |
≥99% |
|
|
failure rate |
≤2% |
Only caused by corona discharge equipment |
|
devicepower supply |
380V， fiftyHZ |
Three phase five wire |
|
Compressed air usage |
≤5m³/h |
After drying, filtering, and stabilizing,≥0.5Mpa |
|
Load bearing capacity requirements |
≤600kg/m2 |
|
|
Whole machine power |
≤50KW |
|
|
Equipment length, widthtall |
|
Equipment length ≤ 4.5m， Width ≤ 45m， Height ≤ 2.5m |
|
Adjustment of materials |
Aluminum foil 2000m |
|
Technical requirements for electric motion sickness on aluminum foil and copper foil rolls
|
project |
describe |
acceptance criteria |
|
processing speed |
Normal processing speed of aluminum foil surface |
≥100m/min |
|
Dain value |
Processed aluminum foil dyn value |
≥32(Maintain for 7 days) |
|
Ozone concentration |
Ozone concentration in the work area |
≤0.15ppm |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-