1、 Aging room insulation material:

Polyurethane foam board, so that the indoor temperature will not be transferred to the outside of the equipment, to ensure the laboratory temperature balance and stability; Set two transparent windows at a reasonable position on the door to observe changes in the indoor samples. The hybrid system adopts a long axis fan motor and a high and low temperature resistant stainless steel multi blade impeller to achieve forced convection vertical circulation, ensuring uniform and stable temperature inside the test chamber. The air duct is the main body of temperature regulation and circulation in the test chamber. The material is stainless steel profile, cut by argon arc welding. The heating system, temperature circulating fan, and laboratory temperature inlet and outlet are all installed in the air duct.

2、 Model specifications:
1. Model: GWS-025
2. Studio dimensions (D × W × H): 3000 (depth) × 3000 (width) × 2800 (height)
3. Dimensions (D × W × H): 3240 (depth) × 3240 (width) × 3040 (height)
4. Temperature range: normal temperature~80 ℃ (temperature range can be adjusted freely)
5. Temperature uniformity: ± 2.0 ℃
6. Temperature fluctuation: ± 1.0 ℃
7. Display accuracy: 0.1 ℃
8. Heating rate: ≥ 1.0-3.0 ℃/min
8. Test timing: 1 to 9999 seconds, minutes, and hours can be selected
9. Total power: 22KW
10. Power supply voltage: AC380V/50HZ
11. Indoor noise: ＜ 45dB

3、 Reference standard:
The high-temperature aging room meets the requirements of the national standard GB2423.2-2001 Test B "High Temperature Test Method" and other relevant standards. Strictly conduct various high-temperature environmental tests within the prescribed range, mainly using far-infrared nickel chromium alloy high-speed heating electric heaters and low-noise, high-temperature resistant centrifugal fans, circulating hot air for drying, drying, aging and other industries.

4、 Strictly within the prescribed range, mainly using far-infrared nickel chromium alloy high-speed heating electric heaters and low-noise high-temperature resistant centrifugal fans, circulating hot air, and playing a role in industries such as drying, drying, and aging. Select high-quality materials, use processing equipment to shape, spray paint the surface of the shell, and make it beautiful and smooth. The color matching is coordinated, and the lines are smooth and natural. Indoor accessories are made of stainless steel profiles, designed reasonably and durable.

5、 Introduction to Structural Design:
The aging room structure is divided into bottom steel frame load-bearing structure, storage board insulation material, air duct ventilation structure, and electrical main control system.
1. To achieve load-bearing effect, the steel frame at the bottom of the equipment adopts I-beams and channel steel as the keel support base plate, laid in a grid shape, all welded firmly, and can withstand the weight of (10t) specimens. The bottom steel frame structure is fixed with embedded parts to avoid equipment deformation and drift caused by excessive forklift pressure. At the same time, anti slip steel plates are laid on the mesh steel structure, making it convenient for forklift driving and loading. The lower part of the car door is equipped with a slope to facilitate vehicle passage.
2. The equipment is processed and formed using processing equipment, and the surface of the shell is sprayed with plastic for a beautiful and smooth appearance. Coordinated color matching, smooth and natural lines.
3. Indoor accessories are made of stainless steel profiles, designed reasonably and durable. On the basis of stable performance in all aspects of the equipment, it is more practical and easy to control. In addition, the device has the advantages of easy installation, simple operation, and basically no need for daily maintenance.