The AT-LTC filter cartridge dust collector has many advantages such as small footprint, high dust removal efficiency, significant energy-saving effect, saving infrastructure investment, convenient maintenance, and long service life, and is widely used in industries such as building materials, electricity, light industry, metallurgy, chemical industry, tobacco, shipbuilding, etc.

The AT-LTC filter cartridge dust collector operates under negative pressure. The dusty gas enters the box through the air inlet, and under the action of negative pressure inside the folding filter cartridge, the gas passes through the filter material from outside the cartridge and enters the cartridge. It enters the clean air chamber and is discharged from the air outlet. When the dust accumulates more and more on the surface of the filter material and the resistance increases (which can also be set by time), the pulse valve opens, and compressed air is directly sprayed into the center of the filter cartridge to sequentially pulse clean the filter cartridge, blowing away the dust trapped on the surface of the filter cartridge. Dust follows the main airflow and falls into the ash hopper under the action of gravity, restoring low resistance operation.

Installation requirements for AT-LTC filter cartridge dust collector

1. The box and ash hopper are locked and leveled by positioning bolts, and welded on site without air leakage.

2. There shall be no air leakage between the pulse valve and the connecting pipe.

3. Installation of AT-LTC filter cartridge dust collector: First, open the side cover plate, remove the spray pipe, hold the upper opening of the filter cartridge by hand, and fix the filter cartridge into the filter chamber through the skeleton; Then tightly fit the filter cartridge into the flower plate hole, tighten the bottom fixing bolt, and make the filter cartridge tightly fasten to the flower plate; Recheck the sealing between the cylinder mouth and the flower plate hole; After installing the spray pipe, adjust the spray pipe to align the spray hole with the center of the filter bag opening, fix the nut on the spray pipe, and cover the cover plate.