Product Introduction:

The ARINC818 receiver box is a high-performance video transmission device based on the ARINC818 protocol, providing 2 redundant FC fiber ports, 1 DVI interface, and 1 HDMI interface. The port speeds support 1.0625Gbps, 2.125Gbps, 3.1875Gbps, 4.25Gbps, and custom non-standard transmission speeds. The ARINC818 receiver box receives video data transmitted from DVI or HDMI video interfaces, uses FPGA chips to package it into video data packets that comply with the ARINC818 protocol requirements, and finally sends the video data to the FC fiber port. The ARINC818 receiver box supports independent power supply and can adapt to various simulation and testing environments.

Product Features

• Compliant with FC-FS, FC-AV, FC-ADVB protocol specifications

• Compliant with ARINC818 protocol specifications

• Support fiber optic communication Class1 and Class3 services

• 1 DVI interface input, 1 HDMI interface input, 2 FC interface outputs

• Supports fiber optic communication at 1.0625Gbps, 2.125Gbps, 3.1875Gbps, 4.25Gbps, and custom non-standard transmission speeds

• The supported resolutions are divided into the following two categories based on the refresh cycle:

◆ Refresh cycle 30Hz

·1920× 1080@30Hz ·1600× 1200@30Hz ·1600× 900@30Hz

·1280× 1024@30Hz ·1024× 768@30Hz ·800× 600@30Hz

·600× 480@30Hz

◆ Refresh cycle 60Hz

·1920× 1080@60Hz ·1600× 900@60Hz ·1280× 1024@60Hz

·1024× 768@60Hz ·800× 600@60Hz ·600× 480@60Hz

• Support resolution customization

• The HDMI interface supports up to 2560 x 1440@30Hz resolution

• DVI interface supports up to 1920x1080@60Hz resolution

• Support dynamic display resolution switching display

• Support RS422 interface communication

Product Application

The ARINC818 protocol is mainly used for real-time lossless high-definition image transmission between airborne devices. It has been successfully applied to multiple civilian and military aircraft models abroad and is one of the development directions for future airborne video transmission buses. The ARINC818 receiver box uses FPGA chips to achieve high-speed real-time conversion between the ARINC818 protocol and the digital video interface DVI, fully leveraging the high-speed, high reliability, and low latency characteristics of the FC network. It can be applied to video transmission between nodes such as display and control platforms, image processing, and video capture.

Technical Parameter

Ordering Information